Recent content by Solarstarshines

My Bios Settings This how i tuned my system everyone's is different what works for me might not work for you. I forgot to snap E-core settings sorry just realized i have them under special voltages in the prediction menu each block is 1.38v for stability

Well mine is tuned to all-core 5.8Ghz P-cores 4.7Ghz E-cores running 7600mhz on a Asus Strix-e never had a issue because i am overclocked and i did adjustments a long time ago and even at stock i never had those issues also using LLC5 and a Negative offset Intel Core i9 14900K @ 5800 MHz -...

My current situation

I have a 4080 and 90 and when my 4090 started acting weird i reinstalled the driver and it worked correctly and gpu scheduling is on.

He doesn't have to do that Reinstall the driver that usually works clean install....

10,000,000

Here you go

Thank you Sir much Appreciated!

Something is definitely wrong with your set up you might want to test the psu cables going to the gpu one bad cable and that's all it takes. You should also tune your memory there is no way i should be smashing your rig with a 4090 installed vs my 4080 but again you need to do some work on that...

That's great i also fixed my issue as well i have all games working and playing ,wasn't hijacking your thread by the way just had the same experience I had a few things going on though bad cable to the psu and my training was set too high and that's why some of my games just wasn't going when i...

13900K Tuff-Z790 (Swapped out Z690) Pictured 64GB TridentZ Royal DDR4-3600mhz EVGA FTW 3090 Ultra Corsair 4000X case Corsair Cappelix 360mm EVGA 1600w platinum Psu Boot drive Samsung980 3x Samsung 980Pro 2x-1TB and 1x-2TB

Just FYI to the OP the problem might be with XMP seems this is the issue with these boards the aloud rated memory speed is the most stable when it comes to games can't believe why half my games are failing but other work no issue. Basically saying use XMP at 3200mhz

For now games like God of War opens and is stable that's a high resource game i am hoping this is fixed

You've read it correctly and you are right i was watching the sensor with no load. I still have issues with games that normally work but.......I did get some of the ones that did crash stable also mentioned i changed the VGA cables and that brought all rails to 12v like it should GPU was being...

Don't know if this is for me or for the OP ,In the process of testing found out one of my 8 Pins was power starved and changed the cable the Power through all 8 pins is 12v now but my Perfcap is Idle confused as hell but one thing for sure all three are running 12v now before two were only...