Intel Laminar RM2 Cooler Specifications for Intel® Core Ultra Processors (Series 2)
The Intel® Laminar RM2 cooler is available in-box with Intel® Core™ Ultra 7 & 5 Desktop Processors (Series 2) listed below.
Intel® Laminar RM2 Cooler Specifications for Intel® Core...
Provides heatsink and thermal solution specifications for Intel® Laminar RM2 Cooler - Gen 2.
www.intel.com
Note: The Intel® Laminar RM2 Cooler is not sold separately either to end-users or Intel® Partner Alliance members.
Intel® Processor Ultra Desktop Processor (Series 2)
- Intel® Core™ Ultra 5 Processor 225
- Intel® Core™ Ultra 5 Processor 225F
- Intel® Core™ Ultra 5 Processor 235
- Intel® Core™ Ultra 5 Processor 265
- Intel® Core™ Ultra 5 Processor 265F
- Standard size
- 3.6 BA Quiet Performance
- Intel Validated Compatibility
- Three-year Limited Warranty
| Heatsink fin material | Aluminum |
| Heatsink base/core material | Copper |
Intel® Laminar RM2 Cooler Thermal Solution Specifications
| Overall Height | Up to 47mm (top of fan to bottom of heatsink) |
| Overall Size | Up to 100mm x 100mm |
| Mass | Up to 340g |
| Sound Power Level | 3.6 BA (2400 RPM, 40C inlet, 65W); 4.6 BA (max RPM) |
| Sound Pressure Level | 30 dBA (2400 RPM, 40C inlet, 65W) |
| Plastic | 8% Post Consumer Recycled Plastic, including Ocean Bound Plastic |
| TDP Support | 65W |
| Fan Type | PWM controlled variable speed fan |
| Connector Type | 4-pin |
| Operating Voltage | 13.2V max, 12.0V rated, 10.8V min |
| Current (peak) | Up to 400mA |
| Max RPM (+/- 5%) | Up to 3250 RPM |
| Min RPM (+/- 20%) | 600 RPM |
| Operating Temp | 0 to 70C |
| Operating Humidity | 85% relative humidity @ 55C |
| Fan Protection | Locked-rotor/polarity protected |
| Sense Frequency | 2 pulses/Rev, 12V pull-up with 10Kohm |
| PWM Frequency | 25KHz +/- 5KHz |
| PWM Pull-up Voltage | 5.25V max |
| PWM Duty Cycle Range | 0–100% |
Intel Laminar RH2 Cooler Specifications for Intel® Core Ultra Processors (Series 2)
This Intel® Laminar RH2 Cooler comes in-box with Intel® Core™ Ultra 9 Processor 285.
Intel® Laminar RH2 Cooler Specifications for Intel® Core...
Provides heatsink and thermal solution specifications for Intel® Laminar RH2 Cooler - Gen 2.
www.intel.com
Note: The Intel® Laminar RH2 Cooler is not sold separately either to end-users or Intel® Partner Alliance members.
Highlights of this cooler
- Controllable ARGB Lighting
- 2.7 BA Near-silent Performance
- Larger / Copper Heat Column
- Intel Validated Compatibility
- Three-year Limited Warranty
| Heatsink fin material | Aluminum |
| Heatsink base/core material | Copper Heat Column |
| Heatsink fastener (Attaches to supplied backplate) material | Stainless Steel |
Intel® Laminar RH2 Cooler Thermal Solution Specifications
| Overall Height | Up to 71mm (top of fan to bottom of heatsink) |
| Overall Size | Up to 103mm x 103mm |
| Mass | Up to 450g |
| Sound Power Level | 2.7 BA (1600 RPM, 40C inlet, 65W); 4.7 BA (max RPM) |
| Sound Pressure Level | 23 dBA (1600 RPM, 40C inlet, 65W) |
| TDP Support | 65W |
| Fan Type | PWM controlled variable speed fan |
| LEDs | aRGB LED light ring and white LED Intel logo |
| Connector Types | 4-pin and 5V aRGB |
| Operating Voltage | 13.2V max, 12.0V rated, 10.8V min |
| Current (peak) | Up to 450mA |
| Max RPM (+/- 5%) | Up to 3000 RPM |
| Min RPM (+/- 20%) | 1000 RPM |
| Operating Temp | 0 to 70C |
| Operating Humidity | 85% relative humidity @ 55C |
| Fan Protection | Locked-rotor/polarity protected |
| Sense Frequency | 2 pulses/Rev, 12V pull-up with 10Kohm |
| PWM Frequency | 25KHz +/- 5KHz |
| PWM Pull-up Voltage | 5.25V max |
| PWM Duty Cycle Range | 0–100% |
