problems disconnecting from the internet

hello all
I encounter a problem on maximux x code with the latest on windows 11 software version Version 12.19.1.37
2021/11/02 2.65 MBytes
Intel Gigabit Ethernet Driver V12.19.1.37 For Windows 10 64-bit.
Support 20H1 / 21H1. (editat)

The network card becomes inoperable or changes its status from 1Gbps to 100mbps, I also encountered this problem on windows 10 in previous versions

I solved the problem by putting the network card to recognize the 1Gbps internet from the network card settings,speed & duplex 1.0Gbps, now if it's on the auto it creates this problem for me,I can find the logs with errors in windows 11 to report them ?

Have you tried Network reset to see if it fixes the issue?

oliver44 said:

The network card becomes inoperable or changes its status from 1Gbps to 100mbps, I also encountered this problem on windows 10 in previous versions

Click to expand...

If the Ethernet network is dropping in performance, it could be that not all the equipment is 1Gbps rated. For example, are you using CAT5e or CAT6 cable? CAT5 cable will only do 100 Mbps. So it looks like you have a CAT5 cable between the router and the computer.

@badrobot I did that too and it doesn't recover only after a windows restart!​

@iko22 I use a wrt1900acs v2 router that comes equipped with a compatible 1Gbps internet cable, I tried to replace the cable with two others, the problem is the same, it's from windows!


I solved the problem by putting the network card to recognize the 1Gbps internet from the network card settings,speed & duplex 1.0Gbps

​