Auto set volume in a batch file

genocide088 · Mar 3, 2023

this is as close i could get to making a batch file to automatcially set the volume down

i need to rewrite script so that just set it to 25% but cant figure out how to do

and if already below 25% just leave it

please someone could edit my code to achieve this?

it only reduces by 40% the =20 is 20 X 2% not what i want a half win

setlocal EnableDelayedExpansion

set /a volume=20

for /l %%x in (1,1,%volume%) do (
powershell -c "(New-Object -ComObject WScript.Shell).SendKeys([char]174)"
)

garlin · Mar 3, 2023

I use SetVol.exe, others might suggest SoundVolumeView. Don't do the SendKeys thing, it's very 80's.

genocide088 · Mar 3, 2023

garlin said:
I use SetVol.exe, others might suggest SoundVolumeView. Don't do the SendKeys thing, it's very 80's.

thanks but i must have it only in a batch file. no 3rd party software please. as i already modified 1000 more annoyances in windows 11 in just a few mouse clicks. funny you say its very 80ties actually i was programming a way back then in 1980 our family had a commodore pet 2001 computer.

garlin · Mar 3, 2023

The problem of changing volume via SendKeys (or keystrokes) is:
1. You have no idea what the current volume level is. Therefore to get to 25% or 50%, you would have to send enough keystrokes to "zero" it, before increasing the volume from zero to 25% or 50%.
2. Sending keystrokes might be visible, if your onscreen volume display reacts in response.
3. You don't have finer control over volume levels.

My choice is SetVol.exe because it's the lightest, least obtrusive volume tool I could find. Otherwise just have PS repeat a ton of down keys, then enter up keys after you've passed zero volume.

Try3 · Mar 3, 2023

I use a batch file for this but I do call up third-party utilities in it.

I use GetAudioVolume to find out what the current volume setting is.
I use NirSoft NirCmd to set the volume to what I want.

Best of luck,
Denis

das10 · Mar 3, 2023

Set Volume to 24 or ( 26 which are the nearest even numbers to 25 as each keysend appears to change volume in 2 percent steps, when going up from 0 or going down from 100).

The batch file below can only set a fixed level of 24 (ie. if your current Voulme is below 24 and you run the script, it will raise it to 24), as there is no way of determining your current Volume level through this script.

Batch_File_to_Set_System_Volume_to_a_Fixed_Level_of_24.bat

Code:

<# ::
if not DEFINED IS_MINIMIZED set IS_MINIMIZED=1 && start "" /min "%~dpnx0" %* && exit
setlocal
powershell -noprofile -ExecutionPolicy ByPass  "[ScriptBlock]::Create((${%~f0} | out-string)) | Invoke-Expression" & Exit
#
goto :EOF
#>
$Level  =  24
Function Set-SpeakerVolume{
Param (
  [Switch]$Min,
  [Switch]$Max,
  [Int]$Percent
)
  $wshShell = New-Object -Com WScript.Shell
  if ($Min){
      1..50 | % {$wshShell.SendKeys([Char]174)}
  }
  elseif ($Max){
      1..50 | % {$wshShell.SendKeys([Char]175)}
  }
  elseif($Percent){
      1..50 | % {$wshShell.SendKeys([Char]174)}
      1..($Percent/2) | % {$wshShell.SendKeys([Char]175)}
  }
  else{
      $wshShell.SendKeys([Char]173)
  }
}
Set-SpeakerVolume -Percent $Level
Exit

Weekend Scripter: Cheesy Script to Set Speaker Volume - Scripting Blog

Summary: Set the speaker volume by using Windows PowerShell—the cheesy script way. Microsoft Scripting Guy, Ed Wilson, is here. It is still the weekend, and that means I get a chance to play. Speaking of playing… Yesterday the Scripting Wife and I were at the horse show in Ashville.

devblogs.microsoft.com

Convert PS to CMD - Windows 10 Help Forums

Good afternoon, I almost have this, but NOT quite. I do NOT want alternative code etc, I want to try and crack this as a conversion from PowerShell to CMD Prompt. It's just my little Brain exercise for the day. This works in PowerShell . . . Code: Get-wmi

www.tenforums.com

A less "cheesy" script which doesn't rely on keysend, which can set an exact level of 25.
Batch_File_to_Set_System_Volume_to_a_Fixed_Level_of_25.bat

Code:

<# ::
setlocal
if not DEFINED IS_MINIMIZED set IS_MINIMIZED=1 && start "" /min "%~dpnx0" %* && exit 
powershell -noprofile -ExecutionPolicy ByPass  "[ScriptBlock]::Create((${%~f0} | out-string)) | Invoke-Expression" & exit
#>

Add-Type -TypeDefinition @'
using System.Runtime.InteropServices;
[Guid("5CDF2C82-841E-4546-9722-0CF74078229A"), InterfaceType(ComInterfaceType.InterfaceIsIUnknown)]
interface IAudioEndpointVolume
{
    // f(), g(), ... are unused COM method slots. Define these if you care
    int f(); int g(); int h(); int i();
    int SetMasterVolumeLevelScalar(float fLevel, System.Guid pguidEventContext);
    int j();
    int GetMasterVolumeLevelScalar(out float pfLevel);
    int k(); int l(); int m(); int n();
    int SetMute([MarshalAs(UnmanagedType.Bool)] bool bMute, System.Guid pguidEventContext);
    int GetMute(out bool pbMute);
}
[Guid("D666063F-1587-4E43-81F1-B948E807363F"), InterfaceType(ComInterfaceType.InterfaceIsIUnknown)]
interface IMMDevice
{
    int Activate(ref System.Guid id, int clsCtx, int activationParams, out IAudioEndpointVolume aev);
}
[Guid("A95664D2-9614-4F35-A746-DE8DB63617E6"), InterfaceType(ComInterfaceType.InterfaceIsIUnknown)]
interface IMMDeviceEnumerator
{
    int f(); // Unused
    int GetDefaultAudioEndpoint(int dataFlow, int role, out IMMDevice endpoint);
}
[ComImport, Guid("BCDE0395-E52F-467C-8E3D-C4579291692E")] class MMDeviceEnumeratorComObject { }
public class Audio
{
    static IAudioEndpointVolume Vol()
    {
        var enumerator = new MMDeviceEnumeratorComObject() as IMMDeviceEnumerator;
        IMMDevice dev = null;
        Marshal.ThrowExceptionForHR(enumerator.GetDefaultAudioEndpoint(/*eRender*/ 0, /*eMultimedia*/ 1, out dev));
        IAudioEndpointVolume epv = null;
        var epvid = typeof(IAudioEndpointVolume).GUID;
        Marshal.ThrowExceptionForHR(dev.Activate(ref epvid, /*CLSCTX_ALL*/ 23, 0, out epv));
        return epv;
    }
    public static float Volume
    {
        get { float v = -1; Marshal.ThrowExceptionForHR(Vol().GetMasterVolumeLevelScalar(out v)); return v; }
        set { Marshal.ThrowExceptionForHR(Vol().SetMasterVolumeLevelScalar(value, System.Guid.Empty)); }
    }
    public static bool Mute
    {
        get { bool mute; Marshal.ThrowExceptionForHR(Vol().GetMute(out mute)); return mute; }
        set { Marshal.ThrowExceptionForHR(Vol().SetMute(value, System.Guid.Empty)); }
    }
}
'@
[audio]::Volume  = 0.25 # 0.25 = 25%, etc.
exit

Change audio level from powershell?

How can I use powershell to set the speaker volume? Ive dug around on here and elsewhere online can cant really find an answer. I think I will have to write something in C# that wraps a Win32 API...

stackoverflow.com

das10 · Mar 3, 2023

@garlin;
As a matter of interest, if I use this batch file, I can maintain the System Volume if it is less than 25, or reduce it to 25 if it is greater than 25. How would one prevent the duplication of the main functional part of the code ?

Code:

<# ::
setlocal
powershell -noprofile -ExecutionPolicy ByPass  "[ScriptBlock]::Create((${%~f0} | out-string)) | Invoke-Expression" & exit
#>


Add-Type -TypeDefinition @'
using System.Runtime.InteropServices;
[Guid("5CDF2C82-841E-4546-9722-0CF74078229A"), InterfaceType(ComInterfaceType.InterfaceIsIUnknown)]
interface IAudioEndpointVolume
{
    // f(), g(), ... are unused COM method slots. Define these if you care
    int f(); int g(); int h(); int i();
    int SetMasterVolumeLevelScalar(float fLevel, System.Guid pguidEventContext);
    int j();
    int GetMasterVolumeLevelScalar(out float pfLevel);
    int k(); int l(); int m(); int n();
    int SetMute([MarshalAs(UnmanagedType.Bool)] bool bMute, System.Guid pguidEventContext);
    int GetMute(out bool pbMute);
}
[Guid("D666063F-1587-4E43-81F1-B948E807363F"), InterfaceType(ComInterfaceType.InterfaceIsIUnknown)]
interface IMMDevice
{
    int Activate(ref System.Guid id, int clsCtx, int activationParams, out IAudioEndpointVolume aev);
}
[Guid("A95664D2-9614-4F35-A746-DE8DB63617E6"), InterfaceType(ComInterfaceType.InterfaceIsIUnknown)]
interface IMMDeviceEnumerator
{
    int f(); // Unused
    int GetDefaultAudioEndpoint(int dataFlow, int role, out IMMDevice endpoint);
}
[ComImport, Guid("BCDE0395-E52F-467C-8E3D-C4579291692E")] class MMDeviceEnumeratorComObject { }
public class Audio
{
    static IAudioEndpointVolume Vol()
    {
        var enumerator = new MMDeviceEnumeratorComObject() as IMMDeviceEnumerator;
        IMMDevice dev = null;
        Marshal.ThrowExceptionForHR(enumerator.GetDefaultAudioEndpoint(/*eRender*/ 0, /*eMultimedia*/ 1, out dev));
        IAudioEndpointVolume epv = null;
        var epvid = typeof(IAudioEndpointVolume).GUID;
        Marshal.ThrowExceptionForHR(dev.Activate(ref epvid, /*CLSCTX_ALL*/ 23, 0, out epv));
        return epv;
    }
    public static float Volume
    {
        get { float v = -1; Marshal.ThrowExceptionForHR(Vol().GetMasterVolumeLevelScalar(out v)); return v; }
        set { Marshal.ThrowExceptionForHR(Vol().SetMasterVolumeLevelScalar(value, System.Guid.Empty)); }
    }
    public static bool Mute
    {
        get { bool mute; Marshal.ThrowExceptionForHR(Vol().GetMute(out mute)); return mute; }
        set { Marshal.ThrowExceptionForHR(Vol().SetMute(value, System.Guid.Empty)); }
    }
}
'@


$alpha = [Audio]::Volume
Write-Host Volume is $alpha


If ($alpha -ge "0.26") {
Add-Type -TypeDefinition @'
using System.Runtime.InteropServices;
[Guid("5CDF2C82-841E-4546-9722-0CF74078229A"), InterfaceType(ComInterfaceType.InterfaceIsIUnknown)]
interface IAudioEndpointVolume
{
    // f(), g(), ... are unused COM method slots. Define these if you care
    int f(); int g(); int h(); int i();
    int SetMasterVolumeLevelScalar(float fLevel, System.Guid pguidEventContext);
    int j();
    int GetMasterVolumeLevelScalar(out float pfLevel);
    int k(); int l(); int m(); int n();
    int SetMute([MarshalAs(UnmanagedType.Bool)] bool bMute, System.Guid pguidEventContext);
    int GetMute(out bool pbMute);
}
[Guid("D666063F-1587-4E43-81F1-B948E807363F"), InterfaceType(ComInterfaceType.InterfaceIsIUnknown)]
interface IMMDevice
{
    int Activate(ref System.Guid id, int clsCtx, int activationParams, out IAudioEndpointVolume aev);
}
[Guid("A95664D2-9614-4F35-A746-DE8DB63617E6"), InterfaceType(ComInterfaceType.InterfaceIsIUnknown)]
interface IMMDeviceEnumerator
{
    int f(); // Unused
    int GetDefaultAudioEndpoint(int dataFlow, int role, out IMMDevice endpoint);
}
[ComImport, Guid("BCDE0395-E52F-467C-8E3D-C4579291692E")] class MMDeviceEnumeratorComObject { }
public class Audio
{
    static IAudioEndpointVolume Vol()
    {
        var enumerator = new MMDeviceEnumeratorComObject() as IMMDeviceEnumerator;
        IMMDevice dev = null;
        Marshal.ThrowExceptionForHR(enumerator.GetDefaultAudioEndpoint(/*eRender*/ 0, /*eMultimedia*/ 1, out dev));
        IAudioEndpointVolume epv = null;
        var epvid = typeof(IAudioEndpointVolume).GUID;
        Marshal.ThrowExceptionForHR(dev.Activate(ref epvid, /*CLSCTX_ALL*/ 23, 0, out epv));
        return epv;
    }
    public static float Volume
    {
        get { float v = -1; Marshal.ThrowExceptionForHR(Vol().GetMasterVolumeLevelScalar(out v)); return v; }
        set { Marshal.ThrowExceptionForHR(Vol().SetMasterVolumeLevelScalar(value, System.Guid.Empty)); }
    }
    public static bool Mute
    {
        get { bool mute; Marshal.ThrowExceptionForHR(Vol().GetMute(out mute)); return mute; }
        set { Marshal.ThrowExceptionForHR(Vol().SetMute(value, System.Guid.Empty)); }
    }
}
'@
[audio]::Volume  = 0.25
}
exit

(pn: small correction made to this bat file.)

garlin · Mar 3, 2023

I've seen this code example before, but even as a reasonably experienced programmer -- do I know what device this references? I can't tell if this manages the master volume, or one of the mixer devices. This is where a dedicated, lightweight app makes more sense to a non-developer.

"SetVol.exe 25" -- And my scripting is done, with a portable, no-fuss EXE that I just copy in my path.

Paul Black · May 27, 2023

I have a weekly computer cleanup Script that I run and when finished it Restarts the computer. Upon Restart, it plays the X-Files theme. Therefore, I set the Speaker Volume within the computer cleanup Script. I have adapted it for this thread with the hope that someone will find in useful.

Code:

@echo off & color 07 & Title Set [Speaker Volume]: & echo.
set "Source=%~0"
set "Function=%Temp%\Speaker_Volume.ps1"
PowerShell Write-Host -ForegroundColor Red """" "IMPORTANT: """ -NoNewline; Write-Host -ForegroundColor DarkYellow """The [Speaker Volume] ONLY works with [EVEN] numbers entered."""; Write-Host -ForegroundColor DarkYellow """"            "Entering [0] will [MUTE] the [Speaker Volume] and retain the existing [Volume Level].""" & echo.
set /p "Level=>Enter the [Speaker Volume] and press <Enter>: "
del %Function% 2>nul & MORE /E +10 "%Source%" > %Function%
Call PowerShell -ExecutionPolicy ByPass -File %Function% %Level%
echo. & echo  The [Speaker Volume] has been set to [%Level%].
echo. & echo ^>Press ANY key to EXIT . . . & pause >nul & Exit

ForEach ($arg in $args) {
         $Level =$arg
         }
Function Set-SpeakerVolume{
Param (
  [Switch]$Min,
  [Switch]$Max,
  [Int]$Percent,
  [Int]$Level
)
  $wshShell = New-Object -Com WScript.Shell
  if ($Min){
      1..50 | % {$wshShell.SendKeys([Char]174)}
  }
  elseif ($Max){
      1..50 | % {$wshShell.SendKeys([Char]175)}
  }
  elseif($Percent){
      1..50 | % {$wshShell.SendKeys([Char]174)}
      1..($Percent/2) | % {$wshShell.SendKeys([Char]175)}
  }
  else{
      $wshShell.SendKeys([Char]173)
  }
}
Set-SpeakerVolume -Percent $Level
cmd /c del %Function%
Exit

I initially set up the original one with the help and input of @das10 .

genocide088 · May 27, 2023

Paul Black said:

I have a weekly computer cleanup Script that I run and when finished it Restarts the computer. Upon Restart, it plays the X-Files theme. Therefore, I set the Speaker Volume within the computer cleanup Script. I have adapted it for this thread with the hope that someone will find in useful.

Code:

@echo off & color 07 & Title Set [Speaker Volume]: & echo.
set "Source=%~0"
set "Function=%Temp%\Speaker_Volume.ps1"
PowerShell Write-Host -ForegroundColor Red """" "IMPORTANT: """ -NoNewline; Write-Host -ForegroundColor DarkYellow """The [Speaker Volume] ONLY works with [EVEN] numbers entered."""; Write-Host -ForegroundColor DarkYellow """"            "Entering [0] will [MUTE] the [Speaker Volume] and retain the existing [Volume Level].""" & echo.
set /p "Level=>Enter the [Speaker Volume] and press <Enter>: "
del %Function% 2>nul & MORE /E +10 "%Source%" > %Function%
Call PowerShell -ExecutionPolicy ByPass -File %Function% %Level%
echo. & echo  The [Speaker Volume] has been set to [%Level%].
echo. & echo ^>Press ANY key to EXIT . . . & pause >nul & Exit

ForEach ($arg in $args) {
         $Level =$arg
         }
Function Set-SpeakerVolume{
Param (
  [Switch]$Min,
  [Switch]$Max,
  [Int]$Percent,
  [Int]$Level
)
  $wshShell = New-Object -Com WScript.Shell
  if ($Min){
      1..50 | % {$wshShell.SendKeys([Char]174)}
  }
  elseif ($Max){
      1..50 | % {$wshShell.SendKeys([Char]175)}
  }
  elseif($Percent){
      1..50 | % {$wshShell.SendKeys([Char]174)}
      1..($Percent/2) | % {$wshShell.SendKeys([Char]175)}
  }
  else{
      $wshShell.SendKeys([Char]173)
  }
}
Set-SpeakerVolume -Percent $Level
cmd /c del %Function%
Exit

I initially set up the original one with the help and input of @das10 .

ok i tried it nice thanks
its better than retarted way to get down volume by 2% repeated
i am getting lazy at redoing code its only a hobby for me
please if possible could you update code NO INPUT FROM USER JUST AUTO SET IT TO 25%
why i want this is cause oh boy i did quite a number on the windows install and all softwares i wanted to install
and all there settings as much as possilbe that i want and all crap ware removed
we talking hundreds of buzy-work nonsense i used to have to do
if you can rewrite like this thanks very much

oh and another one i dont think its possilbe to solve but i tried dam hard even in the registry to auto set all the file associations to the programs i want in WINDOWS 11 not windows 10 which is easy to do
i came close but i dont think that can be done. is retardation why microshit make you even changing edge to google chrome about 10 are you sure you want to switch settings. if anyone know how to do that please let me know

actaully i think i should look into linux but have done so its that windows is the defacto legacy system so unfortunate really

Auto set volume in a batch file

New member

My Computer My Computer

At a glance

Well-known member

My Computer My Computer

At a glance

New member

My Computer My Computer

At a glance

Well-known member

My Computer My Computer

At a glance

Well-known member

My Computer My Computer

At a glance

Well-known member

My Computer My Computer

At a glance

Well-known member

My Computer My Computer

At a glance

Well-known member

My Computer My Computer

At a glance

Active member

New member

My Computer My Computer

At a glance

Similar threads

My Computer

My Computer

My Computer

My Computer

My Computer

My Computer

My Computer

My Computer

My Computer