Best NAS RAID Mode level?

  • Thread starter Deleted member 952
  • Start date

D

Deleted member 952

Guest
Hi,

My Synology DS218J NAS 16TB Network Attached Storage, I'm not sure which RAID mode to use before I was using RAID 1 but apparently defragging isn't allowed. So I'm looking at switching to Synology Hybrid RAID (SHR), is this same as RAID 1 where it mirrors 2 drives. As I'm using 2x8TB drives where they mirror each other so I don't lose any data.

Which would you guys recommend I use which would let me use File System Defragmentation (BTRFS file system)

Thanks for any help
 

My Computer

As to the RAID level, I just yesterday received a NAS unit with 2 x 2TB drives to replace my current NAS setup, am now debating with myself if I want RAID 0 with its striping of both drives or RAID 1 with mirroring one drive to the other. As I understand it, each has a downside, striping gives 4TB capacity but if one drive fails all data is lost while mirroring allows recovery if one drive fails but total capacity is only 2TB. My main use of a NAS drive is for storage of data and downloaded programs for access for any computer on my network.
 

My Computers

System One System Two

  • OS
    Win11 Pro RTM
    Computer type
    Laptop
    Manufacturer/Model
    Dell Vostro 3400
    CPU
    Intel Core i5 11th Gen. 2.40GHz
    Memory
    12GB
    Hard Drives
    256GB SSD NVMe
  • Operating System
    Windows 11 Pro RTM x64
    Computer type
    PC/Desktop
    Manufacturer/Model
    Dell Vostro 5890
    CPU
    Intel Core i5 10th Gen. 2.90GHz
    Memory
    16GB
    Graphics card(s)
    Onboard, no VGA, using a DisplayPort-to-VGA adapter
    Monitor(s) Displays
    24" Dell
    Hard Drives
    512GB SSD NVMe, 2TB WDC HDD
    Browser
    Firefox, Edge
    Antivirus
    Windows Defender/Microsoft Security
Businesses use Raid system because drives are often multi user and store critical business data. They would never use Raid 0.

The decision in domestic use depends on what you are using drive for. If data is critical, then Raid 0 is not a good idea.

However Raid 1 reduces your capacity by 50%.

If you do not use Raid but just have two separate drives, a pragmatic approach is that you could partition each wirh say 1 TB for critical data, and 1 TB for non critical data.

You then mirror the critical data on both drives but not non critical data. That way, your effective capacity is 3 TB.

If course, this approach requires a bit of user management.

If capacity is not an issue, and you are sure you want Raid, then Raid 1 is safer than Raid 0.

The decision as to what you do depends on data, criticality, and capacity needs. Only you can assess that.
 

My Computer

System One

  • OS
    Windows 10 Pro + others in VHDs
    Computer type
    Laptop
    Manufacturer/Model
    ASUS Vivobook 14
    CPU
    I7
    Motherboard
    Yep, Laptop has one.
    Memory
    16 GB
    Graphics Card(s)
    Integrated Intel Iris XE
    Sound Card
    Realtek built in
    Monitor(s) Displays
    N/A
    Screen Resolution
    1920x1080
    Hard Drives
    1 TB Optane NVME SSD, 1 TB NVME SSD
    PSU
    Yep, got one
    Case
    Yep, got one
    Cooling
    Stella Artois
    Keyboard
    Built in
    Mouse
    Bluetooth , wired
    Internet Speed
    72 Mb/s :-(
    Browser
    Edge mostly
    Antivirus
    Defender
    Other Info
    TPM 2.0
RAID 0 on Linux / QNAP type RAID systems if you do it by software (package MDADM) is perfectly OK as you can then have devices of different sizes and use the entire capacity of your HDD's. It works essentially as "JBOD" Just a bunch of disks but much faster as I/O is paralleled across all the devices whereas in "JBOD" mode disks get filled up sequentially.

However disadvantage is that with RAID 0 - if you lose any disk within the array you lose the lot. My experience is though that decent HDD's are robust and reliable and breakdowns are actually quite rare these days. The speed improvement in RAID 0 plus the convenience of being able to "Mix HDD sizes" to get the maximum storage IMO is worth it. -- Make sure though you back up data in case you need to re-build the array.

There's no correct answer here -- obviouslly if you are runing "critical missions" you can't afford an outage so RAID 0 wouldn't be of any use but for typical home LAN's using NAS systems then RAID 0 can make decent sense -- but you Must take backups regularly.

(I've had RAID 0 running for around 3 years now mainly 24/7 on two NAS systems -- I've only needed to replace 1 HDD because of failure and around 6 HDD's due to "hardware" upgrades for bigger, faster drives. I've 100% confidence in my systems and the backup stategies in place).

NAS 1 2 RAID 0 Arrays array 1 -- 2 X 4TB HDD's, array 2--- 2 X 5 TB HDD's

NAS 2 1 RAID array array 1 --4X 6TB HDD's.

Disk failure these days really is comparatively rare and the speed of RAID 0 is IMO well worth it -- even using software RAID the speed improvement is massive. Just ensure you have a decent backup strategy in place.

For Linux type NAS systems rsync and its GUI version GRSYNC is excellent for managing backups and can easily be run regularly via crontab process.

Incidentally some external HDD enclosures often have a built in selectable RAID system too so those can be worth looking at as well if you have some spare HDD's / older HDD's that you could use.

Cheers
jimbo
 

My Computer

System One

  • OS
    Windows XP,7,10,11 Linux Arch Linux
    Computer type
    PC/Desktop
    CPU
    2 X Intel i7
RAID 0 on Linux / QNAP type RAID systems if you do it by software (package MDADM) is perfectly OK as you can then have devices of different sizes and use the entire capacity of your HDD's. It works essentially as "JBOD" Just a bunch of disks but much faster as I/O is paralleled across all the devices whereas in "JBOD" mode disks get filled up sequentially.

However disadvantage is that with RAID 0 - if you lose any disk within the array you lose the lot. My experience is though that decent HDD's are robust and reliable and breakdowns are actually quite rare these days. The speed improvement in RAID 0 plus the convenience of being able to "Mix HDD sizes" to get the maximum storage IMO is worth it. -- Make sure though you back up data in case you need to re-build the array.

There's no correct answer here -- obviouslly if you are runing "critical missions" you can't afford an outage so RAID 0 wouldn't be of any use but for typical home LAN's using NAS systems then RAID 0 can make decent sense -- but you Must take backups regularly.

(I've had RAID 0 running for around 3 years now mainly 24/7 on two NAS systems -- I've only needed to replace 1 HDD because of failure and around 6 HDD's due to "hardware" upgrades for bigger, faster drives. I've 100% confidence in my systems and the backup stategies in place).

NAS 1 2 RAID 0 Arrays array 1 -- 2 X 4TB HDD's, array 2--- 2 X 5 TB HDD's

NAS 2 1 RAID array array 1 --4X 6TB HDD's.

Disk failure these days really is comparatively rare and the speed of RAID 0 is IMO well worth it -- even using software RAID the speed improvement is massive. Just ensure you have a decent backup strategy in place.

For Linux type NAS systems rsync and its GUI version GRSYNC is excellent for managing backups and can easily be run regularly via crontab process.

Incidentally some external HDD enclosures often have a built in selectable RAID system too so those can be worth looking at as well if you have some spare HDD's / older HDD's that you could use.

Cheers
jimbo
All good advice but in the end if capacity is not an issue, Raid 1 is safer as data is inherently backed up.

For most users, speed is not really a major issue.

Can you have say a 1 TB drive and a 2 TB drive, and set up a 1 TB partition mirroring 1 TB drive in Raid 1 mode, and then use remaining 1 TB for noncritical data?
 

My Computer

System One

  • OS
    Windows 10 Pro + others in VHDs
    Computer type
    Laptop
    Manufacturer/Model
    ASUS Vivobook 14
    CPU
    I7
    Motherboard
    Yep, Laptop has one.
    Memory
    16 GB
    Graphics Card(s)
    Integrated Intel Iris XE
    Sound Card
    Realtek built in
    Monitor(s) Displays
    N/A
    Screen Resolution
    1920x1080
    Hard Drives
    1 TB Optane NVME SSD, 1 TB NVME SSD
    PSU
    Yep, got one
    Case
    Yep, got one
    Cooling
    Stella Artois
    Keyboard
    Built in
    Mouse
    Bluetooth , wired
    Internet Speed
    72 Mb/s :-(
    Browser
    Edge mostly
    Antivirus
    Defender
    Other Info
    TPM 2.0
All good advice but in the end if capacity is not an issue, Raid 1 is safer as data is inherently backed up.

For most users, speed is not really a major issue.

Can you have say a 1 TB drive and a 2 TB drive, and set up a 1 TB partition mirroring 1 TB drive in Raid 1 mode, and then use remaining 1 TB for noncritical data?
RAID 1 -- I think the problem is here that for mirrored drives they need to be the same size so you would get 1 TB mirrored and the other 1 TB -- ???? probably unuseable especially if the HDD's are attached to a hardware RAID card -- would depend on the hardware as Windows has no real "Native" software RAID system.

Windows can create mirrored volumes though -- you need two vols (min) of course and need to set them up as dynamic disks and then with disk management you can create a mirrored volume. That should give you a 1TB mirrored "partition" with the other 1 TB useable as not part of the mirrored partition. I've got no idea though how recovery would work for that HDD though.

I still think even with "Classical RAID 1" you need to backup data anyway -- IMO you can't have too many backups and cheap external 4 and even 5 TB self powered USB "passport" type drives IMO are brilliant for that purpose e.g backup music / video etc.

Cheers
jimbo
 

My Computer

System One

  • OS
    Windows XP,7,10,11 Linux Arch Linux
    Computer type
    PC/Desktop
    CPU
    2 X Intel i7
RAID 1 -- I think the problem is here that for mirrored drives they need to be the same size so you would get 1 TB mirrored and the other 1 TB -- ???? probably unuseable especially if the HDD's are attached to a hardware RAID card -- would depend on the hardware as Windows has no real "Native" software RAID system.

Windows can create mirrored volumes though -- you need two vols (min) of course and need to set them up as dynamic disks and then with disk management you can create a mirrored volume. That should give you a 1TB mirrored "partition" with the other 1 TB useable as not part of the mirrored partition. I've got no idea though how recovery would work for that HDD though.

I still think even with "Classical RAID 1" you need to backup data anyway -- IMO you can't have too many backups and cheap external 4 and even 5 TB self powered USB "passport" type drives IMO are brilliant for that purpose e.g backup music / video etc.

Cheers
jimbo
I was more curious than a desire to do this - for most users, I suspect RAID is just not really needed, and a simpler NAS server with two drives is adequate, and you use software to sync critical data.
 

My Computer

System One

  • OS
    Windows 10 Pro + others in VHDs
    Computer type
    Laptop
    Manufacturer/Model
    ASUS Vivobook 14
    CPU
    I7
    Motherboard
    Yep, Laptop has one.
    Memory
    16 GB
    Graphics Card(s)
    Integrated Intel Iris XE
    Sound Card
    Realtek built in
    Monitor(s) Displays
    N/A
    Screen Resolution
    1920x1080
    Hard Drives
    1 TB Optane NVME SSD, 1 TB NVME SSD
    PSU
    Yep, got one
    Case
    Yep, got one
    Cooling
    Stella Artois
    Keyboard
    Built in
    Mouse
    Bluetooth , wired
    Internet Speed
    72 Mb/s :-(
    Browser
    Edge mostly
    Antivirus
    Defender
    Other Info
    TPM 2.0
Is Synology Hybrid RAID (SHR) same as RAID 1? My data is critical I cannot lose it, I was using RAID 1 before but it says it's not compatible with File System Defragmentation.
 

My Computer

Just a guess, anything happening in RAID 1 has to happen on both drives at the same time, can interfere with some drive features.
 

My Computers

System One System Two

  • OS
    Win11 Pro RTM
    Computer type
    Laptop
    Manufacturer/Model
    Dell Vostro 3400
    CPU
    Intel Core i5 11th Gen. 2.40GHz
    Memory
    12GB
    Hard Drives
    256GB SSD NVMe
  • Operating System
    Windows 11 Pro RTM x64
    Computer type
    PC/Desktop
    Manufacturer/Model
    Dell Vostro 5890
    CPU
    Intel Core i5 10th Gen. 2.90GHz
    Memory
    16GB
    Graphics card(s)
    Onboard, no VGA, using a DisplayPort-to-VGA adapter
    Monitor(s) Displays
    24" Dell
    Hard Drives
    512GB SSD NVMe, 2TB WDC HDD
    Browser
    Firefox, Edge
    Antivirus
    Windows Defender/Microsoft Security
As a systems engineer for a living, these are my thoughts.

RAID 1 is primarily for OS drives and such and it's really protecting immediately your ability to boot a critical system in case a hard drive fails. It never suffices as a "backup" because if you get a virus, malware, or inadvertently delete a file, you lose the duplicate side immediately. You should always have a regular backup in place to protect your data.

RAID 0 is great especially when testing or when you need the fastest IO you can get. Again, if any drive in that array fails, you lose it all. You should always have a regular backup in place to protect your data.

Other RAID levels like Raid 5, Raid 6, Raid 10 or Raid 50 are used in business environments for preservation of data in the case that drives fail. These provide the best balance of speed and performance along with space capacity potential. The level you use is determined by a number of things, primarily the application that you are running on the server. For example, with a SQL server with a high data write rate, a RAID level of 10 is often preferable to RAID 5 as you aren't having to calculate parity on all of those rights. And business class systems typically use enterprise class RAID controllers which provide much higher levels of performance than software raid.
 

My Computers

System One System Two

  • OS
    Windows 11 Pro
    Computer type
    PC/Desktop
    Manufacturer/Model
    Beelink SEI8
    CPU
    Intel Core i5-8279u
    Motherboard
    AZW SEI
    Memory
    32GB DDR4 2666Mhz
    Graphics Card(s)
    Intel Iris Plus 655
    Sound Card
    Intel SST
    Monitor(s) Displays
    Asus ProArt PA278QV
    Screen Resolution
    2560x1440
    Hard Drives
    512GB NVMe
    PSU
    NA
    Case
    NA
    Cooling
    NA
    Keyboard
    NA
    Mouse
    NA
    Internet Speed
    500/50
    Browser
    Edge
    Antivirus
    Defender
    Other Info
    Mini PC used for testing Windows 11.
  • Operating System
    Windows 10 Pro
    Computer type
    PC/Desktop
    Manufacturer/Model
    Custom
    CPU
    Ryzen 9 5900x
    Motherboard
    Asus Rog Strix X570-E Gaming
    Memory
    64GB DDR4-3600
    Graphics card(s)
    EVGA GeForce 3080 FT3 Ultra
    Sound Card
    Onboard
    Monitor(s) Displays
    ASUS TUF Gaming VG27AQ. ASUS ProArt Display PA278QV 27” WQHD
    Screen Resolution
    2560x1440
    Hard Drives
    2TB WD SN850 PCI-E Gen 4 NVMe
    2TB Sandisk Ultra 2.5" SATA SSD
    PSU
    Seasonic Focus 850
    Case
    Fractal Meshify S2 in White
    Cooling
    Dark Rock Pro CPU cooler, 3 x 140mm case fans
    Mouse
    Logitech G9 Laser Mouse
    Keyboard
    Corsiar K65 RGB Lux
    Internet Speed
    500/50
    Browser
    Chrome
    Antivirus
    Defender.
Hi there

@pparks1

One thing you omitted in your reply is certainly of relevance to many HOME users :

Another advantage of RAID 0 particularly if you have systems that have a good software RAID system such as mdadm then you can mix devices having unequal sizes and the whole data area is available -- e.g a 1 TB HDD and a 1.5TB HDD can be configured as a RAID 0 array of 2.5 TB and also will balance I/O across both devices - so even if the Disk speeds are different then speed is "optimised" for both devices.

But if you lose a Disk then the whole array goes so you need to back up data regularly (which you should be doing in any case).

For home users who have spare HDD's with unequal capacity or older HDD's lying around RAID 0 makes decent sense for gaining extra capacity - without having to split large files or libraries such as Music Data bases / Video files over several HDD's.

BUT HAVE BACKUP.

My experience though is these days decent HDD's rarely if ever fail these days even when used 24/7 --but again "ad Nauseam" they CAN fail so have backup.

Cheers
jimbo
 

My Computer

System One

  • OS
    Windows XP,7,10,11 Linux Arch Linux
    Computer type
    PC/Desktop
    CPU
    2 X Intel i7
@jimbo45

As far as failures go, I think those of us who live in the enterprise world are a bit skewed in our opinions on failure rates. On enterprise SAN's and NAS devices, they are very proactive towards fail and they scan the drives and they predict when they believe that a failure may occur. So we replace drives at a much higher frequency rate that typical home users might.

But generally speaking, I do believe they are pretty reliable.
 

My Computers

System One System Two

  • OS
    Windows 11 Pro
    Computer type
    PC/Desktop
    Manufacturer/Model
    Beelink SEI8
    CPU
    Intel Core i5-8279u
    Motherboard
    AZW SEI
    Memory
    32GB DDR4 2666Mhz
    Graphics Card(s)
    Intel Iris Plus 655
    Sound Card
    Intel SST
    Monitor(s) Displays
    Asus ProArt PA278QV
    Screen Resolution
    2560x1440
    Hard Drives
    512GB NVMe
    PSU
    NA
    Case
    NA
    Cooling
    NA
    Keyboard
    NA
    Mouse
    NA
    Internet Speed
    500/50
    Browser
    Edge
    Antivirus
    Defender
    Other Info
    Mini PC used for testing Windows 11.
  • Operating System
    Windows 10 Pro
    Computer type
    PC/Desktop
    Manufacturer/Model
    Custom
    CPU
    Ryzen 9 5900x
    Motherboard
    Asus Rog Strix X570-E Gaming
    Memory
    64GB DDR4-3600
    Graphics card(s)
    EVGA GeForce 3080 FT3 Ultra
    Sound Card
    Onboard
    Monitor(s) Displays
    ASUS TUF Gaming VG27AQ. ASUS ProArt Display PA278QV 27” WQHD
    Screen Resolution
    2560x1440
    Hard Drives
    2TB WD SN850 PCI-E Gen 4 NVMe
    2TB Sandisk Ultra 2.5" SATA SSD
    PSU
    Seasonic Focus 850
    Case
    Fractal Meshify S2 in White
    Cooling
    Dark Rock Pro CPU cooler, 3 x 140mm case fans
    Mouse
    Logitech G9 Laser Mouse
    Keyboard
    Corsiar K65 RGB Lux
    Internet Speed
    500/50
    Browser
    Chrome
    Antivirus
    Defender.
RAID 10 all the way
 

My Computer

System One

  • OS
    Win 11
    Computer type
    PC/Desktop
    CPU
    AMD Ryzen 7
    Motherboard
    MSI MEG B550 UNIFY-X
    Memory
    32Gb
    Graphics Card(s)
    GeForce RTX 2080Ti
    Monitor(s) Displays
    3
    Hard Drives
    500Gb SSD Boot
    D: 2tb
    E: 1Tb
    F: 4Tb NAS RAID 1
    G: 4Tb NAS RAID 1
    H: 8Tb NAS RAID 1
    I: 8Tb NAS RAID 1
    TrueNAS NAS
    4Tb Pool RAID 1
    16Tb Pool RAID 1
    PSU
    EVGA 1300W PSU
    Cooling
    Cool Master MasterLiquid ML240L Dual Radiator
    Internet Speed
    1Ggabit
RAID 10 all the way
Raid 10 is great for speed and the ability to lose up to 50% of your drives. However, it's terrible for storage lost, as you only get 50% of your raw capacity.
 

My Computers

System One System Two

  • OS
    Windows 11 Pro
    Computer type
    PC/Desktop
    Manufacturer/Model
    Beelink SEI8
    CPU
    Intel Core i5-8279u
    Motherboard
    AZW SEI
    Memory
    32GB DDR4 2666Mhz
    Graphics Card(s)
    Intel Iris Plus 655
    Sound Card
    Intel SST
    Monitor(s) Displays
    Asus ProArt PA278QV
    Screen Resolution
    2560x1440
    Hard Drives
    512GB NVMe
    PSU
    NA
    Case
    NA
    Cooling
    NA
    Keyboard
    NA
    Mouse
    NA
    Internet Speed
    500/50
    Browser
    Edge
    Antivirus
    Defender
    Other Info
    Mini PC used for testing Windows 11.
  • Operating System
    Windows 10 Pro
    Computer type
    PC/Desktop
    Manufacturer/Model
    Custom
    CPU
    Ryzen 9 5900x
    Motherboard
    Asus Rog Strix X570-E Gaming
    Memory
    64GB DDR4-3600
    Graphics card(s)
    EVGA GeForce 3080 FT3 Ultra
    Sound Card
    Onboard
    Monitor(s) Displays
    ASUS TUF Gaming VG27AQ. ASUS ProArt Display PA278QV 27” WQHD
    Screen Resolution
    2560x1440
    Hard Drives
    2TB WD SN850 PCI-E Gen 4 NVMe
    2TB Sandisk Ultra 2.5" SATA SSD
    PSU
    Seasonic Focus 850
    Case
    Fractal Meshify S2 in White
    Cooling
    Dark Rock Pro CPU cooler, 3 x 140mm case fans
    Mouse
    Logitech G9 Laser Mouse
    Keyboard
    Corsiar K65 RGB Lux
    Internet Speed
    500/50
    Browser
    Chrome
    Antivirus
    Defender.
RAID 10 all the way
Raid 10 is great for speed and the ability to lose up to 50% of your drives. However, it's terrible for storage lost, as you only get 50% of your raw capacity.
RAID 10 user here on a Western Digital NAS box holding 4 WD Red Pro drives. The advantage is speed and redundancy, this disadvantage as pointed out by pparks is loss of half your storage. Out of a possible 24TB, I only have 10.7TB available.

Anyway, I'm just using 3TB of the 10 available, so...
 

My Computers

System One System Two

  • OS
    Windows 11 Pro 23H2 (Build 22631.3296)
    Computer type
    PC/Desktop
    Manufacturer/Model
    Custom built
    CPU
    Intel i9-9900K
    Motherboard
    Gigabyte Aorus Z390 Xtreme
    Memory
    32G (4x8) DDR4 Corsair RGB Dominator Platinum (3600Mhz)
    Graphics Card(s)
    Radeon VII
    Sound Card
    Onboard (ESS Sabre HiFi using Realtek drivers)
    Monitor(s) Displays
    NEC PA242w (24 inch)
    Screen Resolution
    1920 x 1200
    Hard Drives
    5 Samsung SSD drives: 2X 970 NVME (512 & 1TB), 3X EVO SATA (2X 2TB, 1X 1TB)
    PSU
    EVGA Super Nova I000 G2 (1000 watt)
    Case
    Cooler Master H500M
    Cooling
    Corsair H115i RGB Platinum
    Keyboard
    Logitech Craft
    Mouse
    Logitech MX Master 3
    Internet Speed
    500mb Download. 11mb Upload
    Browser
    Microsoft Edge Chromium
    Antivirus
    Windows Security
    Other Info
    System used for gaming, photography, music, school.
  • Operating System
    Win 10 Pro 22H2 (build 19045.2130)
    Computer type
    PC/Desktop
    Manufacturer/Model
    Custom Built
    CPU
    Intel i7-7700K
    Motherboard
    Gigabyte GA-Z270X-GAMING 8
    Memory
    32G (4x8) DDR4 Corsair Dominator Platinum (3333Mhz)
    Graphics card(s)
    AMD Radeon R9 Fury
    Sound Card
    Onboard (Creative Sound Blaster certified ZxRi)
    Monitor(s) Displays
    Dell U2415 (24 inch)
    Screen Resolution
    1920 x 1200
    Hard Drives
    3 Samsung SSD drives: 1x 512gig 950 NVMe drive (OS drive), 1 x 512gig 850 Pro, 1x 256gig 840 Pro.
    PSU
    EVGA Super Nova 1000 P2 (1000 watt)
    Case
    Phantek Enthoo Luxe
    Cooling
    Corsair H100i
    Mouse
    Logitech MX Master
    Keyboard
    Logitech MK 710
    Internet Speed
    100MB
    Browser
    Edge Chromium
    Antivirus
    Windows Security
    Other Info
    This is my backup system.
snapraid can be a good alternative to RAID if all you're looking for is backup protection for DATA drives... I use it on my data server.

 

My Computer

System One

  • OS
    Windows 11
Even on a NAS you should still backup its data regularly -- you don't have to back the entire thing up daily but either do differential / incremental or backup specific directories at regular intervals.

For home users if you do (and you should) backup NAS regularly there's absolutely no reason why you shouldn't use RAID 0 -- fast and uses entire capacity of drives.

How many home users with a NAS are running "Mission critical" applications where the NAS needs to be online 24/7. The MTBF ("Mean time before Failure") of even domestic HDD's is very good these days so rebuilding arrays should be a very rare occurrence.

With a NAS - frequent switching on and off is the most likely cause of disk problems - decent HDD's consume very little power when idling - start up and slow down causes most wear on bearings, fans, and other mechanical parts. Leave the NAS on 24/7 if possible.

Cheers
jimbo
 

My Computer

System One

  • OS
    Windows XP,7,10,11 Linux Arch Linux
    Computer type
    PC/Desktop
    CPU
    2 X Intel i7
Hi,

My Synology DS218J NAS 16TB Network Attached Storage, I'm not sure which RAID mode to use before I was using RAID 1 but apparently defragging isn't allowed. So I'm looking at switching to Synology Hybrid RAID (SHR), is this same as RAID 1 where it mirrors 2 drives. As I'm using 2x8TB drives where they mirror each other so I don't lose any data.

Which would you guys recommend I use which would let me use File System Defragmentation (BTRFS file system)

Thanks for any help


You could just use Karen's Replicator.

You can schedule it to "copy" what's on one drive (part or all), to the other.
It only copies what has changed since the last time it ran.
This way, you get the advantages of mirrored, BUT, defrag still works.
Best of all... there's no RAID to deal with.

I'm sure there are other programs that can do this. But I've been using Replicator since the XP days.
Never had even one problem.
 

My Computers

System One System Two

  • OS
    Win 11 Home ♦♦♦22631.3374 ♦♦♦♦♦♦♦23H2
    Computer type
    PC/Desktop
    Manufacturer/Model
    Built by Ghot® [May 2020]
    CPU
    AMD Ryzen 7 3700X
    Motherboard
    Asus Pro WS X570-ACE (BIOS 4702)
    Memory
    G.Skill (F4-3200C14D-16GTZKW)
    Graphics Card(s)
    EVGA RTX 2070 (08G-P4-2171-KR)
    Sound Card
    Realtek ALC1220P / ALC S1220A
    Monitor(s) Displays
    Dell U3011 30"
    Screen Resolution
    2560 x 1600
    Hard Drives
    2x Samsung 860 EVO 500GB,
    WD 4TB Black FZBX - SATA III,
    WD 8TB Black FZBX - SATA III,
    DRW-24B1ST CD/DVD Burner
    PSU
    PC Power & Cooling 750W Quad EPS12V
    Case
    Cooler Master ATCS 840 Tower
    Cooling
    CM Hyper 212 EVO (push/pull)
    Keyboard
    Ducky DK9008 Shine II Blue LED
    Mouse
    Logitech Optical M-100
    Internet Speed
    300/300
    Browser
    Firefox (latest)
    Antivirus
    Bitdefender Internet Security
    Other Info
    Speakers: Klipsch Pro Media 2.1
  • Operating System
    Windows XP Pro 32bit w/SP3
    Computer type
    PC/Desktop
    Manufacturer/Model
    Built by Ghot® (not in use)
    CPU
    AMD Athlon 64 X2 5000+ (OC'd @ 3.2Ghz)
    Motherboard
    ASUS M2N32-SLI Deluxe Wireless Edition
    Memory
    TWIN2X2048-6400C4DHX (2 x 1GB, DDR2 800)
    Graphics card(s)
    EVGA 256-P2-N758-TR GeForce 8600GT SSC
    Sound Card
    Onboard
    Monitor(s) Displays
    ViewSonic G90FB Black 19" Professional (CRT)
    Screen Resolution
    up to 2048 x 1536
    Hard Drives
    WD 36GB 10,000rpm Raptor SATA
    Seagate 80GB 7200rpm SATA
    Lite-On LTR-52246S CD/RW
    Lite-On LH-18A1P CD/DVD Burner
    PSU
    PC Power & Cooling Silencer 750 Quad EPS12V
    Case
    Generic Beige case, 80mm fans
    Cooling
    ZALMAN 9500A 92mm CPU Cooler
    Mouse
    Logitech Optical M-BT96a
    Keyboard
    Logitech Classic Keybooard 200
    Internet Speed
    300/300
    Browser
    Firefox 3.x ??
    Antivirus
    Symantec (Norton)
    Other Info
    Still assembled, still runs. Haven't turned it on for 13 years?
snapraid can be a good alternative to RAID if all you're looking for is backup protection for DATA drives... I use it on my data server.

Hi folks
I think whatever RAID system (or none) you use on NAS servers you STILL need to back it up regularly. The Mirroring system can protect against one drive failing but what if the MOBO itself fails or the OS gets a glitch or a user accidentally or maliciously deletes data.

Seems many here regard RAID 1 as sufficient for 100% of data protection and never worry about backup.

False "economy". Even the most experienced of people have accidentally deleted data at times. Some data from corrupt disks can't be recovered no matter what the "Spiel is" on the backup / recovery program. What happens also if the server gets destroyed via lightning strike, accidental damage -- fluids (cofee / beer etc split into it), electrical cable failure (rodents etc eating bits of cable), cpu / mobo failure, machine is "stolen" etc etc.

Some or most of these are unlikely to happen but people have experienced all these things so if you have important data that can't be re-created elsewhere you need to back it up away from the NAS regularly -- imagine having to re-rip 3,000 CD's again --even if you still had the CD's and that assumes they were still readable too. Some of those self powered 4 or 5 TB external USB drives are ideal for NAS backups.

Cheers
jimbo
 

My Computer

System One

  • OS
    Windows XP,7,10,11 Linux Arch Linux
    Computer type
    PC/Desktop
    CPU
    2 X Intel i7
@kuyenmotdivad

I have a DS220j with 2 x 2TB HDDs configured as Synology SHR which I use to store photographs - I'm a professional photographer so they are critical files to me. SHR acts as a mirror so I only get 2TB of storage but can tolerate one drive failing just like RAID 1. The difference is that SHR allows you to replace a failed drive with another of different capacity, which is useful if you later decide you need bigger drives as they can be changed one at a time with the NAS mirroring from old to new each time.

Whilst I don't want to decry the comments by others above, suggesting/discussing the merits of RAID 5 or RAID 10 is irrelevant to the OP as he has a two bay NAS. No offence meant to anyone :)

What I do agree about though is that a NAS is not a complete backup solution and you need to have at least two other copies of your critical files elsewhere, one of which should be off-site.
 

My Computers

System One System Two

  • OS
    Windows 11 Home (64 bit) 23H2; Build 22621.2715
    Computer type
    PC/Desktop
    Manufacturer/Model
    N/A
    CPU
    Intel i5-8400
    Motherboard
    ASUS PRIME Z370-P
    Memory
    32GB
    Graphics Card(s)
    NVIDIA GeForce RTX3060
    Sound Card
    NVIDIA High Definition Audio
    Monitor(s) Displays
    Samsung LU28R55
    Screen Resolution
    3840 x 2160
    Hard Drives
    C:/ KINGSTON SA400M8480G (410GB)
    D:/ Samsung SSD 850 EVO (250GB)
    E:/ Samsung 3.5" Internal HDD (2TB)
    H:/ 3.5" External USB HDD (2TB)
    J:/ Samsung 3.5" Internal HDD (2TB)
    PSU
    N/K
    Case
    N/K
    Cooling
    N/K
    Keyboard
    Bluetooth wireless
    Mouse
    Bluetooth wireless
    Internet Speed
    1Gb/s
    Browser
    Brave
    Antivirus
    Windows Defender
    Other Info
    4TB Synology NAS (SHR)
    Upgraded from W10 Home on 29/04/2022
  • Operating System
    Windows 11 Home (64 bit) 23H2; Build 22631.2861
    Computer type
    Laptop
    Manufacturer/Model
    Huawei Honor MagicBook Pro
    CPU
    Intel i5-10210U
    Motherboard
    Huawei HBB-WX9-PCB M1010
    Memory
    16MB
    Graphics card(s)
    NVIDIA GeForce MX350
    Sound Card
    Intel
    Monitor(s) Displays
    Inbuilt 16.2" CMN PnP Monitor
    Screen Resolution
    1920 x 1080
    Hard Drives
    410GB HDD (manufacturer not known)
    PSU
    External 65W USB-C
    Case
    Aluminium
    Cooling
    Dual coolers
    Mouse
    Huawei HID compliant
    Keyboard
    Std QWERTY
    Internet Speed
    1Gb/s
    Browser
    Brave
    Antivirus
    Windows Defender
    Other Info
    Upgraded from W10 on 28/04/2022
    Upgraded to 23H2 on 28/12/2023
Deleted member 952, It's always important to acknowledge and thank those who have helped you in online communities. One way to do this is by using the like button located at the bottom of each post. By clicking on the like button, you can show your appreciation and support for the helpful content that others have shared with you. This small gesture can go a long way in encouraging people to continue contributing and sharing their knowledge with you and others in the community.

So, please remember to use the like button to show your gratitude and support to those who have helped you along the way. It's important to note that a "like" gives 1 point, "Helpful" gives 5 points, and for exceptional help, "Great support" gives 10 points.

Latest Support Threads

Back
Top Bottom