BSOD Last few weeks - Power draw issue?

Motherboard went out back in December, replaced everything (CPU/Mobo/Ram and fresh Win11 Install) except for PSU and GPU. So I'm leaning towards it being a power issue because it started recently (couple weeks ago) and randomly. (psu/gpu little over 5 years old) but hoping to narrow it down before i start throwing more money at it.

Only thing i can really confirm at this second is that it only happens when launching some games and it starts loading Shaders or similar (leads me to GPU) but since the CPU and motherboard are new makes me wonder if the power draw from my CPU throttling up is preventing my GPU from getting enough power since the psu has a few years on its belt and i know they get a bit weaker over time. (games ive experienced it so far, Apex, Dead by daylight, Bellwright, Ghost of Tsushima, Bodycam)

Log reports (Google Drive)

Most recent Crash 6/11/24 10:56 PM (22:56) EST

Please perform the following steps:


1) Run Tuneup plus > post a share link






2) Turn off Windows fast startup:




3) Create a new restore point




4) Post an image or share link displaying disk management




5) Open administrative command prompt and type or copy and paste:

reagentc /info
reagentc /enable5
reagentc /info


Post a share link.



6) Swap test the CPU

zbook said:

Please perform the following steps:


1) Run Tuneup plus > post a share link

https://www.tenforums.com/attachments/bsod-crashes-debugging/360139d1645183596-batch-files-use-bsod-debugging-tuneup_plus_log.zip

Batch files for use in BSOD debugging - Windows 10 Help Forums

Information This thread is for use by the BSOD team to store batch files that can be used to collect additional data, fix settings or anything else that is useful in debugging BSOD problems in Windows 10. The way I see it working is the first

www.tenforums.com

Batch files for use in BSOD debugging - Windows 10 Help Forums

Information This thread is for use by the BSOD team to store batch files that can be used to collect additional data, fix settings or anything else that is useful in debugging BSOD problems in Windows 10. The way I see it working is the first

www.tenforums.com

2) Turn off Windows fast startup:

Turn On or Off Fast Startup in Windows 11

This tutorial will show you how to turn on or off fast startup in Windows 11. There are three startup modes in Windows: Cold (traditional) Wake-from-hibernation Fast Starting with Windows 8.x, the default shutdown and restart scenario has been updated and named fast startup. Fast startup...

www.elevenforum.com

3) Create a new restore point

Create System Restore Point in Windows 11

This tutorial will show you how to manually create a restore point in Windows 11. Turning on system protection for a drive allows System Restore to include the drive when restore points are created so you can undo undesired system changes by reverting to a previous point in time. System...

www.elevenforum.com

4) Post an image or share link displaying disk management

How to Post a Screenshot of Disk Management

How to Post a Screenshot of Disk Management at Ten Forums

www.tenforums.com

5) Open administrative command prompt and type or copy and paste:

reagentc /info
reagentc /enable5
reagentc /info


Post a share link.



6) Swap test the CPU

Click to expand...

I will run through this when i get off work today.
For the swap test I'm assuming you mean changeout the CPU? if that's the case unfortunately i don't have another CPU of that socket on hand.

Open administrative command prompt and type or copy and paste:

reagentc /info
reagentc /enable
reagentc /info

(there was a typo in post #2)

See if you can check various vendors for return / restocking fees to swap test a CPU.

zbook said:

Open administrative command prompt and type or copy and paste:

reagentc /info
reagentc /enable
reagentc /info

(there was a typo in post #2)

See if you can check various vendors for return / restocking fees to swap test a CPU.

Click to expand...

Here is those 3, also did the recovery point. only thing i havent done is the cpu test swap so ill have to look around if it comes to that.

Please reboot then run Tuneup plus again > post a share link



Download and install one of these temperature monitoring software:

Speccy
HhWMonitor64
Speedfan

zbook said:

Please reboot then run Tuneup plus again > post a share link



Download and install one of these temperature monitoring software:

Speccy
HhWMonitor64
Speedfan

Code:

  Started on Wed 06/12/2024 at 17:58:43.80

        [SFC /ScanNow]

Beginning system scan.  This process will take some time.
There is a system repair pending which requires reboot to complete.  Restart
Windows and run sfc again.

Click to expand...

New tune up attached. i do have HWMonitor installed so i can run any benches or tests as needed.

Edit: apologies for any delayed responses or seemingly MIA. i work from 4am-4pm so i work all day and go to sleep early and will perform any repairs/tests when i get home.

Tuneup plus was good.

Most often software stress tests display pass when there is malfunctioning hardware (false negatives).

So swap testing is used to rule in or rule out malfunctioning hardware.


If you want to see if there are any stess test confirmations and have time these are the most frequently used for the CPU:

a) Prime95 > 3 hours
Post images or share links:
Temperature maximum
Continuous testing time
Any interruption due to BSOD

b) OCCT > multiple 1 hour tests
Post images or share links.

zbook said:

Tuneup plus was good.

Most often software stress tests display pass when there is malfunctioning hardware (false negatives).

So swap testing is used to rule in or rule out malfunctioning hardware.


If you want to see if there are any stess test confirmations and have time these are the most frequently used for the CPU:

a) Prime95 > 3 hours

Prime95 - Stress Test Your CPU

Stress test your CPU for stability issues with Prime95

www.tenforums.com

Post images or share links:
Temperature maximum
Continuous testing time
Any interruption due to BSOD

b) OCCT > multiple 1 hour tests

OCBASE/OCCT : Free, all-in-one stability, stress test, benchmark and monitoring tool for your PC

Ocbase is the home of OCCT, the most popular all-in-one stability / stress testing / benchmarking / monitoring tool available for PC

www.ocbase.com

Post images or share links.

Click to expand...

so. just tried running Prime95, Ran it 3 times and got these errors, all from "Worker 1" within a min or 2 of it running and max Temp of my CPU was 100c

[Thu Jun 13 17:36:24 2024]
FATAL ERROR: Final result was 2579A8CE, expected: 87610A79.
Hardware failure detected running 288K FFT size, consult stress.txt file.
[Thu Jun 13 17:45:30 2024]
FATAL ERROR: Final result was 03BA84A7, expected: 87610A79.
Hardware failure detected running 288K FFT size, consult stress.txt file.
[Thu Jun 13 17:47:25 2024]
FATAL ERROR: Final result was CB7029D9, expected: 87610A79.
Hardware failure detected running 288K FFT size, consult stress.txt file.

Please take pictures > post images

You might want to take a look at this. It may be applicable. Intel finds root cause of Raptor Lake CPU stability issues, BIOS with new microcode underway