Upgrading SSD on HP OMEN 17-cb00011nv

Hello!

I am not very familiar with the differences between M.2 SSD types and I want your help to avoid buying something not suitable for my wife's laptop. The current SSD is 256GB and has these specs:


I found this 480GB SSD which should be compatible with that laptop, but I want to make sure before I order. Thanks.


The laptop also has a SATA port, so I can temporarily connect a SATA disk, make a full disk backup of the original and then restore it on the new disk. This should boot OK, right?

The One in computer now is PCIe 3.0 and the other is PCIe 4.0

Both are length size 2280 so that is the same.

Find out if the PCIe slot supports PCIe 4 as if not it will work but you will not get the increased transfer speed of PCIe 4.0

The 4.0 would just run at 3.0 speed if the slot does not support 4.0

PCIe 4.0 has double the data transfer rate of PCIe 3.0

No matter what it will work as the length is the same (2280).

Like putting a SATA III disk on a SATA II slot. It works fine at slower speed. I don't mind because the old disk is almost full and I want a larger one. I realize the speed difference will be small, but the main goal is to increase capacity not performance.

Thanks for your time.