- Local time
- 2:36 PM
- Posts
- 5,167
- Location
- Hafnarfjörður IS
- OS
- Windows XP,10,11 Linux (Fedora 42&43 pre-release,Arch Linux)
Hi folks
If anybody is running XP VM systems on W11 Host (or W10 even) with VMWare and wants to share / access large TB drives on the NAS (the large drives are of course on the NAS) - you'll need to enable SMB1 on the host and on the NAS in the Samba config file on the NAS to set max protocol="NT1" in the smb .conf file (latest SMB versions give error if you say SMB1 or SMBV1)
and also specify lanman auth=yes
ntlm auth=yes
You may need to enable ntlm auth in the local security policy on the host as well - probably not needed. Not sure about HYPER-V as host though.
Then full access to NAS drives whatever size.
cheers
jimbo
If anybody is running XP VM systems on W11 Host (or W10 even) with VMWare and wants to share / access large TB drives on the NAS (the large drives are of course on the NAS) - you'll need to enable SMB1 on the host and on the NAS in the Samba config file on the NAS to set max protocol="NT1" in the smb .conf file (latest SMB versions give error if you say SMB1 or SMBV1)
and also specify lanman auth=yes
ntlm auth=yes
You may need to enable ntlm auth in the local security policy on the host as well - probably not needed. Not sure about HYPER-V as host though.
Then full access to NAS drives whatever size.
cheers
jimbo
My Computer
System One
-
- OS
- Windows XP,10,11 Linux (Fedora 42&43 pre-release,Arch Linux)
- Computer type
- PC/Desktop
- CPU
- 2 X Intel i7
- Screen Resolution
- 4KUHD X 2
