Recent content by gfd

Garlin, just wanted to say thanks again

This also worked ( echo enable echo config echo interface ten-gigabitEthernet 1/0/4 echo power inline supply disable echo end echo exit echo exit echo disconnect ) | plink -v 192.168.50.110 -l admin -pw f*********** -P 22 PAUSE

Hi garlin, This worked! Thank you so much. The routine ran and the device attached to port 4 turned on. Adding the command file did the trick. Here is the Output: Looking up host "192.168.50.110" for SSH connection Connecting to 192.168.50.110 port 22 We claim version...

Thanks again garlin, I am a bit embarrassed. I didn't bother listing the model. It is a TP-Link switch. TL-SX3602HPP. My apologies

Thanks Garlin, I can't get past the first request for a carriage return. There are seven additional carriage returns. Any idea how I deal with that? Thanks

Greetings, I am trying to write a batch file which will use SSH to connect with a managed switch. Once connected, I would like to turn the POE on or off for a single port on the switch. Here is the command prompt routine. My input is in bold letters and RETURN is my use of the enter key...

Thanks, iman, Just to be sure I was clear, the files and folders I attempted to rename, after the shortcut associated with RTL Utility, were all random and not associated with either Studio One or RTL utility. Glad to know that this happens to others as well. Graham

Windows Version: 22H2 22621.1265 Greetings, I just had a strange issue in Windows. I was working with the following applications: -Studio One 6 -Oblique Audio RTL Utility I was running some tests to check the round-trip latency for my audio interface. I created a shortcut for the RTL Utility...

Hi Oat, Both OSs are installed on the same 1TB drive. Space allocated as follows: -EFI System partition -MSR partition -OS 1 partition -OS 2 partition -WinRE partition -data partition -data partition Both OS installations are operation without issue after login. The issue is getting to the...

Greetings, I am in the process of installing a dual boot Windows 11 system. I am to the point where drivers are installed and customizations, including Personalization, are set up. Both installs have the Lock Screen set to Windows Spotlight. In addition, both installs are updated to the same...

Greetings, I have just started using a new machine. I dual boot Windows 11 and have just installed drivers, customized the OSs and brought them up to date. One thing that is a bit weird is when I open Explorer, the view is different. In one install, the opening Explorer page only shows drives...

Well I tripped over the solution. I first uninstalled Start11. That didn't change anything. I have a dual boot system, and I logged into my other Windows install (call it 'B') and the panels on Explorer and Settings were generic. I went back to the install with the issue (call it 'A') and...

Thanks glasskuter. I'll check out later and report back.

Greetings, I just did a reinstall of one of my Windows 11 partitions. All going well...mostly. I chose a manual color in Personalisation - Liddy Green. Now, File Explorer panels have this kind of sick looking lime green color to them. I should point out that I also have Start11 installed. That...

Thanks everyone. I came up with an alternate solution. I created 2 batch files. One used 'net use' to map the network share as z: - The second one used 'net use' with an asterisk and y to delete the mapped drive. After deleting the share, I entered \\192.168.xx.x into the address bar of Windows...