ejohnh
Member
Hello All, Having just upgraded my system with new CPU and Mobo, and got W11 up and running on a 120G SSD, I decided to use 2 250G SSds in RAID0 mode as my main system. I eventually got the Raid array set up and was able to see the two systems available at startup. The raid system booted okay but the original system wouldn't boot. Is it because I installed the initial W11 with the SATA in ACH1 mode? When I installed the raid system I included a raid driver during the install. Should I reinstall the original system and include a Raid driver during that installation?
Any advice would be most welcome
Thanks
John
Any advice would be most welcome
Thanks
John
My Computer
System One
-
- OS
- W11
- Computer type
- PC/Desktop
- Manufacturer/Model
- own build
- CPU
- AMD Ryzen 5 5600G with Radeon Graphics
- Motherboard
- AsusTek ROG STRIX B550-F Gaming WIFI 11
- Memory
- 16G DDR4
- Graphics Card(s)
- none (see above)
- Sound Card
- None.
- Monitor(s) Displays
- Toshiba TV
- Hard Drives
- CT240BX500SSD1 240.06 GB SSD 2011E3EEBB71
and CT240BX500SSD1 240.06 GB SSD 2011E3EEF81B -> Configured as RAID 0 Boot
_____________________________________________________________________
Samsung SSD 870 QVO 1TB (backup)
CT120BX500SSD1 120.03 GB SSD 2015E3F65066
Corsair Force GS 128.04 GB SSD 1406790300009796088C
- PSU
- Seasonic G12 GM-650 80 Plus Gold Semi-Modular Power
- Case
- Antec
- Cooling
- Air
- Keyboard
- Logitech
- Mouse
- Logitech
- Internet Speed
- ~30Mbs
- Browser
- Chrome
- Antivirus
- Bitdefender
- Other Info
- Macrium Reflect backup