Solved Several BSOD crashes in just one day after fresh install (coming from 10)

Seroko · Oct 15, 2025

https://imgur.com/IKekkvu

WMIC added correctly.
Tuneup plus and V2 log collector worked and dropped logs.

gather_additional_dump_files dropped this on prompt console window:
C:\WINDOWS\LiveKernelReports
The above folder contains no DMP files.
You may press a key to close this window.

Gonna try now the steps in post #20.

zbook · Oct 15, 2025

In case the Sea Tools Long generic test is disrupted by a BSOD then run the Sea Tools bootable > take picture > post images or share links

Please make sure that there is no cleaning during the troubleshooting disk cleanup, ccleaner, etc.).

Seroko · Oct 15, 2025

Doing long generic tests (on SeaTools) to drives 1 by 1, to check if any of them causes the crashes.
So far the system disk (WD SN770) and both SATA3 2.5'' have passed, those 3 were my candidates to what could be failing (specially the 2.5'' ones).

https://imgur.com/1ghes7J

Edit: What I didn't realize is that one of the M2 drives (the ADATA one) has 66% life left, can it be the cause?

https://imgur.com/5J9bWeh

zbook · Oct 15, 2025

After completing all drive tests and posting images or share links:

Run Memtest86+ for 8 or more passes > take pictures > post images or share links

Memtest86+ | The Open-Source Memory Testing Tool

Just 1 error is a test fail and testing can be aborted.

The more the passes the better the testing conditions.

It sometimes takes passes into the 20's to detect malfunctioning RAM.

The RAM can be tested all at one time or one at a time in the same DIMM.

Memtest86+ | The Open-Source Memory Testing Tool

MemTest86+ - Test RAM

zbook · Oct 15, 2025

The installed RAM were not seen on the QVL (Qualified Vendor List)

If you see KF560C36-16 on the support list > post images or share links

ROG STRIX X670E-A GAMING WIFI - Support

www.asus.com

Seroko · Oct 15, 2025

Kit is KF560C36BBEAK2/32, AIDA was missing some details, I specifically bought it cause it appeared in the QVL list:

https://imgur.com/YzWAuXW

https://imgur.com/8vmWzO6

It was one of the few from the QVL I could find in my country, and the only one that could use EXPO on AMD.

Seatools is still checking my 4TB Barracuda HDD, 4% after like 20 minutes, this might take long time.

And btw, huge thanks for all the help you're bringing, you're a gift from the gawds.

zbook · Oct 15, 2025

In between tests run: get memory configuration > post a share link

https://www.tenforums.com/attachments/bsod-crashes-debugging/317051d1612150787-batch-files-use-bsod-debugging-getmemoryconfiguration.bat

Batch files for use in BSOD debugging - Windows 10 Help Forums

Information This thread is for use by the BSOD team to store batch files that can be used to collect additional data, fix settings or anything else that is useful in debugging BSOD problems in Windows 10. The way I see it working is the first

www.tenforums.com

Batch files for use in BSOD debugging - Windows 10 Help Forums

Information This thread is for use by the BSOD team to store batch files that can be used to collect additional data, fix settings or anything else that is useful in debugging BSOD problems in Windows 10. The way I see it working is the first

www.tenforums.com

Seroko · Oct 15, 2025

Like this? It's running now at default speed (4800MHz), not EXPO (6000MHz).

zbook · Oct 15, 2025

It also was unable to detect the full part ID.

When were these RAM installed?

zbook · Oct 15, 2025

Take you're time to run tests overnight as needed.

Please post images or share links for all steps / tests.

For new BSODs post a new V2 share link into the newest post.

Seroko · Oct 15, 2025

They were bought in early january 2024, in spanish store PCComponentes (one of the biggest here). Appeared as KF560C36BBEAK2-32 in the store and in the box, never had an issue prior to installing W11. Could be relevant to change the slots? I'm using A2 and B2 (2 and 4, counting from the CPU) to avoid any issues with the AIO liquid cooling CPU block.

zbook said:
Take you're time to run tests overnight as needed.

Please post images or share links for all steps / tests.

For new BSODs post a new V2 share link into the newest post.

I'll leave it running tests on both Barracuda HDDs, since they take really long time.

zbook · Oct 15, 2025

Please do not reseat the RAM at this time.

1) Rule in / out drive problems > if all tests are unremarkable then advance to step 2)

2) Test RAM as per instructions in post #24

XxXxX · Oct 15, 2025

just as an added thought.
WD M2 SSD's use HMB (Host Memory Bus)
which had problems with Windows 11

it maybe worth checking for firmware updates for that SSD
ScanDisk Dashboard link for WD SSD's

SanDisk SSDs, Memory Cards, and Flash Drives for Your Digital Life | Sandisk

Find software for your SanDisk portable SSD, internal SSD, SD & microSD memory cards, and much more. Free software for your digital storage needs.

support-en.sandisk.com

best of luck Steve ..

Seroko · Oct 15, 2025

Gonna check it now, I tried to install Dashboard a few minutes earlier, and it showed an error during the installation, few minutes after that the pc crashed again (HDD 1TB was at 26% in the test, HDD 4TB at 21%).

The V2 logs after the couple of crashes is in the comment, I'll restart the Seagate thing again but this time I'll run only on the 1TB HDD cause it ran faster and the pc didn't crash when 4TB HDD was testing alone.

Edit: Dashboard shows a firmware update, is it safe to install an update on a system drive?

https://imgur.com/R1qyEqz

https://www.reddit.com/r/framework/comments/1g6hxwq/any_of_you_guys_got_affected_by_this_theres_a

There's people on reddit talking about issues with the firmware I'm running, maybe that's the cause of the problem.
Still runing SeaTools to check on the HDDs.

zbook · Oct 16, 2025

Please update drivers as needed after completing drive and RAM tests.

Event[5171]
Log Name: System
Source: stornvme
Date: 2025-10-15T23:19:10.5480000Z
Event ID: 11
Task: Ninguna
Level: Error
Opcode: N/A
Keyword: Clßsico,
User: N/A
User Name: N/A
Computer: DESKTOP-5NLD6GV
Description:
El controlador detect¾ un error de controladora en \Device\RaidPort2.

The driver detected a controller error on \Device\RaidPort2.

Error al crear el archivo de volcado debido a un error durante la creaci¾n del volcado.

Error creating dump file due to an error during dump creation.

Volumen C: (\Device\HarddiskVolume2) debe desconectarse durante un breve perÝodo de tiempo para realizar una correcci¾n puntual. Ejecute "CHKDSK /SPOTFIX" localmente en la lÝnea de comandos o ejecute "REPAIR-VOLUME <drive:>" de forma local o remota mediante PowerShell.

Volume C: (\Device\HarddiskVolume2) needs to be taken offline for a short period of time to perform a spot fix. Run "CHKDSK /SPOTFIX" locally at the command line, or run "REPAIR-VOLUME <drive:>" locally or remotely using PowerShell.

Error de Reparaci¾n de inicio.

Startup Repair error.

Error en la inicializaci¾n del archivo de volcado

Error initializing dump file

Seroko · Oct 16, 2025

I'll do it, for now I'm running Seatools testing the 1TB HDD, in Seatools the WD disk passed a long generic test but who knows, I'll try that after testing everything.

There's more people reporting issues with WD disks and Windows 11:

https://www.reddit.com/r/techsupport/comments/1g6jx51/the_driver_detected_a_controller_error_on

zbook · Oct 16, 2025

Attempt to make changes / tests one at a time to rule in / out problems.

There are multiple types of drive tests.

A drive can pass multiple types and fail on another test type.

If the drive test results are unremarkable > then test RAM > then update WD drivers

If BSOD continue > then plan to detach all non-Windows drives > post a new V2 for new BSOD

Seroko · Oct 16, 2025

Yet another crash during Seatools+HDD 1TB, this time at around 90%, the error shown was "KMODE_EXCEPTION_NOT_HANDLED (0x1E)".

https://imgur.com/iEf5IDG

V2 log attached in the comment. I'll try to run it again.

zbook · Oct 16, 2025

Please continue with the drive and RAM testing.

Use Sea Tools bootable as needed.

The RAM can be tested before running HD Tune, chkdsk, and HD Sentinel.

EF
154
1E
9F

Code:

Event[1453]
  Log Name: System
  Source: volmgr
  Date: 2025-10-16T07:28:50.8080000Z
  Event ID: 161
  Task: None
  Level: Error
  Opcode: N/A
  Keyword: Classic,
  User: N/A
  User Name: N/A
  Computer: DESKTOP-5FKTC9R
  Description:
Dump file creation failed due to error during dump creation. BugCheckProgress was: 0x00040049

Seroko · Oct 16, 2025

After some hours woke up with the system not crashing this entire time, and the HDD 1TB testing has passed ok this time.
Gonna check the last drive before testing memory, could take a long long time.

Solved Several BSOD crashes in just one day after fresh install (coming from 10)

Member

Attachments

My Computer My Computer

At a glance

Well-known member

My Computer My Computer

At a glance

Member

My Computer My Computer

At a glance

Well-known member

My Computer My Computer

At a glance

Well-known member

My Computer My Computer

At a glance

Member

My Computer My Computer

At a glance

Well-known member

My Computer My Computer

At a glance

Member

Attachments

My Computer My Computer

At a glance

Well-known member

My Computer My Computer

At a glance

Well-known member

My Computer My Computer

At a glance

Member

My Computer My Computer

At a glance

Well-known member

My Computer My Computer

At a glance

Just a Computer User

My Computers My Computers

At a glance

At a glance

Member

Attachments

My Computer My Computer

At a glance

Well-known member

My Computer My Computer

At a glance

Member

My Computer My Computer

At a glance

Well-known member

My Computer My Computer

At a glance

Member

Attachments

My Computer My Computer

At a glance

Well-known member

My Computer My Computer

At a glance

Member

My Computer My Computer

At a glance

Similar threads

My Computer

My Computer

My Computer

My Computer

My Computer

My Computer

My Computer

My Computer

My Computer

My Computer

My Computer

My Computer

My Computers

My Computer

My Computer

My Computer

My Computer

My Computer

My Computer

My Computer