lorentzyeung
Member
- Local time
- 9:45 AM
- Posts
- 7
- OS
- Windows 11 Pro for Workstations Version 25H2
Hello everyone,
I'm having persistent issues getting Wake on LAN (WoL) to work on my Alienware Aurora R16 desktop PC. I'm trying to wake it remotely using AnyDesk from my Android phone, but it gets stuck at "connecting" with no error message (it times out after like a few mins automatically). The PC's indicator light stays off until I provide physical input (like moving the mouse), at which point it wakes up fully, the lights come on, the monitor turns on, and I can see the login screen both on my phone via AnyDesk and on the PC itself. This suggests the connection request is detected once the PC is manually woken, but WoL isn't triggering the wake automatically.
I've tried a bunch of troubleshooting steps based on online guides and suggestions, including BIOS changes, Windows settings, and alternative apps, but nothing has worked so far. I'd really appreciate any insights, especially from other R16 owners or WoL experts. Below, I'll detail my setup, the exact issue, and everything I've tried.
I've followed multiple guides, including the AirDroid troubleshooting article on AnyDesk WoL issues, a Dell forum thread on Aurora R16 WoL settings, and other online suggestions. Here's everything step-by-step, including commands and settings changes.
thanks in advance!
I'm having persistent issues getting Wake on LAN (WoL) to work on my Alienware Aurora R16 desktop PC. I'm trying to wake it remotely using AnyDesk from my Android phone, but it gets stuck at "connecting" with no error message (it times out after like a few mins automatically). The PC's indicator light stays off until I provide physical input (like moving the mouse), at which point it wakes up fully, the lights come on, the monitor turns on, and I can see the login screen both on my phone via AnyDesk and on the PC itself. This suggests the connection request is detected once the PC is manually woken, but WoL isn't triggering the wake automatically.
I've tried a bunch of troubleshooting steps based on online guides and suggestions, including BIOS changes, Windows settings, and alternative apps, but nothing has worked so far. I'd really appreciate any insights, especially from other R16 owners or WoL experts. Below, I'll detail my setup, the exact issue, and everything I've tried.
- PC Model: Dell Alienware Aurora R16 (desktop gaming PC).
- BIOS Version: 2.17 (latest as of my last check; no updates available via Dell SupportAssist).
- Network Adapter: Killer E3100G Ethernet Controller (wired connection only; no WiFi involved for WoL, as I know WiFi doesn't support it reliably).
- OS: Windows 11 Pro Workstation (fully updated).
- Router/Network: Home network with a standard consumer router. PC is connected via Ethernet cable. My phone is on cellular data for remote tests (outside the home network), but I've also tested locally on WiFi to isolate issues.
- Software for WoL:
- AnyDesk (latest version on both PC and Android phone; unattended access enabled with password).
- Other apps tried: WakeOnLan (Android app), WolOn (Android app), and a few others like Mocha WoL for testing Magic Packets.
- Power State Testing: I've tested WoL from both sleep/standby (S3) and full shutdown (S5) states. Fast Startup is disabled (more on that below).
- MAC Address: Confirmed via ipconfig /all and used it in app tests.
- No VPN/Firewall Blocks: Windows Defender Firewall allows AnyDesk on private/public networks. No third-party antivirus or VPN interfering.
- When I initiate a WoL connection from AnyDesk on my phone (entering the PC's AnyDesk ID and selecting "Wake up" if prompted), it shows "Connecting..." indefinitely (it timed out after a few mins).
- The PC remains powered off (indicator light off, no fans spinning, monitor blank).
- If I physically interact with the PC (e.g., move the mouse or press a key), it wakes up immediately. At that point, the AnyDesk connection completes almost instantly—I see the login screen on my phone, and everything works fine for remote control.
- This happens consistently on remote attempts (cellular). On local network tests (phone on home WiFi).
- No wake at all from full shutdown; from sleep.
- Other WoL apps (Wake On Lan, WolOn) fail similarly: They claim to send the Magic Packet, but the PC doesn't respond remotely.
- I suspect the Magic Packet isn't reaching or triggering the NIC properly, especially remotely, or the PC is in a deep power state where the NIC loses power/listening capability.
I've followed multiple guides, including the AirDroid troubleshooting article on AnyDesk WoL issues, a Dell forum thread on Aurora R16 WoL settings, and other online suggestions. Here's everything step-by-step, including commands and settings changes.
- Disabled Fast Startup (Hiberboot):
- Ran in admin Command Prompt: reg add "HKLM\System\CurrentControlSet\Control\Session Manager\Power" /v "HiberbootEnabled" /t REG_DWORD /d 0 /f
- Rebooted to apply.
- Verified: reg query "HKLM\System\CurrentControlSet\Control\Session Manager\Power" /v "HiberbootEnabled" – Output shows HiberbootEnabled REG_DWORD 0x0.
- This ensures full shutdown (S5) instead of hybrid hibernate, which can interfere with WoL.
- Enabled Wake Timers in Power Settings:
- In admin Command Prompt: powercfg /SETACVALUEINDEX SCHEME_CURRENT SUB_SLEEP RTCWAKE 1
- Then: powercfg /setactive SCHEME_CURRENT (applies to plugged-in/desktop mode).
- This allows wake timers without needing the GUI, though it's more for scheduled wakes than pure WoL.
- BIOS Changes (Dell-Specific for R16):
- Restarted and entered BIOS (spammed F2 during boot).
- Navigated to Advanced > Power Options/Power Management.
- Set "Deep Sleep Control" to Disabled (was Enabled by default).
- Enabled "USB PowerShare in S4/S5 state" (to keep power to ports/NIC in low-power states).
- Saved and exited.
- Rebooted. Note: No direct "Wake on LAN" toggle in this BIOS, which matches what others reported for R16.
- Configured Network Adapter Settings (Killer Ethernet):
- Opened Device Manager > Network Adapters > Right-clicked "Killer E3100G" > Properties.
- Power Management tab:
- Checked "Allow this device to wake the computer."
- Checked "Only allow a magic packet to wake the computer." (currently unchecked again as i want wider sources)
- Checked "Allow the computer to turn off this device to save power" (recommended for Killer to enable low-power listening).
- Advanced tab:
- Set "Shutdown Wake-On-Lan" to Enabled.
- Set "Wake on Magic Packet" to Enabled.
- Set "Wake on Pattern Match" to Enabled.
- Updated drivers, systems says so at least.
- Checked Killer Control Center software (pre-installed): No conflicting bandwidth/priority settings; disabled unnecessary services temporarily via services.msc (e.g., stopped "Killer Network Service") to test, but re-enabled after no change.
- AnyDesk-Specific Settings:
- On PC: Opened AnyDesk > Settings > Security > Enabled "Enable Wake-On-LAN."
- Set up unattended access with a strong password.
- On phone: Enabled WoL in AnyDesk settings.
- Firewall and Network Checks:
- In Windows Security > Firewall > Allowed apps: Ensured AnyDesk is allowed for private and public networks.
- Alternative WoL Apps and Tools:
- WakeOnLan (Android): Entered PC's MAC address, IP , port 9. Sent packet locallyno response.
- WolOn (Android): Similar setup; supports secure ON, but same issue—stuck sending remotely, no wake.
- Other General Troubleshooting:
- Updated AnyDesk to latest on both devices.
- Tested with PC in sleep vs. shutdown.
- Read additional forums/guides: Reddit threads on Killer adapters and WoL, Intel docs on E3100G (confirmed WoL support), and general WoL setup articles.
thanks in advance!
- Windows Build/Version
- windows 11 pro workstation
My Computer
At a glance
Windows 11 Pro for Workstations Version 25H2Intel(R) Core(TM) i7-14700KF (3.40 GHz)32.0 GB (31.7 GB usable)RTX PRO 6000 96GB
- OS
- Windows 11 Pro for Workstations Version 25H2
- Computer type
- PC/Desktop
- Manufacturer/Model
- Alienware R16 RTX 4090
- CPU
- Intel(R) Core(TM) i7-14700KF (3.40 GHz)
- Memory
- 32.0 GB (31.7 GB usable)
- Graphics Card(s)
- RTX PRO 6000 96GB
- Internet Speed
- Killer E3100G Ethernet Controller
