Monitors - Windows or Nvidia?


I Just Need Hel

New member
Local time
5:45 AM
Posts
1
OS
Windows11 Pro
I have a new Dell XPS 8960 with an I9 processor, 64GB of RAM and 2TB of HD space on one SSD, running with Win11 Pro. I also have an Nvidia GeForce RTX 4070Ti video card.

This is a personal use PC (located at home) that I sometimes use for business. I am not a gamer. It is more than most need at home or even for business but, at age 67, this is the last computer I will buy before I am dead and gone. I would rather go by natural causes but, if I buy another computer, my wife will be the one to kill me. So, I had to buy enough hardware to get me through until the end. LOL

I actually got this PC in January of 2024 but, because of my work, could not get it set up until July of 2024. Everything was working smoothly until 11/30/24 or 12/01/24. I have two Dell 27" monitors. All of a sudden, they both went blank but the computer was still operating. I could tell this because of the various alert sounds I was getting from Outlook and my feeds. So, I knew the PC was still on and working. The only warning I got before it happened was the message that the PC was going into Stand-by Mode. That usually means it was going to sleep.

However, that should not have been possible since I knew my power settings were set for it to never go into sleep mode. I do use a screen saver but it is from the Windows screen saver feature and it is nothing fancy. It just has two words that do a toggle back and forth. When a PC is in sleep mode, just hitting the space bar or moving the mouse should bring the screen to life. But that did not happen. So, I waited and waited and waited. Space bar. Mouse. Space bar. Mouse. Nothing happened. The PC power light was still on and so were the monitor power lights.

So, eventually, I had to do a hard shut-down. Then, when I re-booted, I got the blue Recovery screen that said Windows did not load correctly. My options were to either restart the PC or go through a series of steps that were above my paygrade to determine why Windows did not load correctly. I suspect those of you in the know have seen this before and are familiar with the options.

So, I was going to restore to a previous time but there were no restore points prior to 11/30/24 and the first restore point was on 12/3/24. Again, this first happened on Saturday, 11/30/24, or Sunday, 12/01/24. So, restoring to a prior time was not going to be possible or even help.

This has happened multiple times since that weekend. Only once have I been able to get the screens to reappear after pushing the space bar or moving the mouse. I even tried changing my refresh rate from 60 to 120 but that did not help either. Incidentally, the monitors are connected directly to the video card via two display port cables.

At this point, I am assuming the problem is the video card but I really have no way of knowing. My PC works fine, otherwise and is very quiet. Oh, by the way, when the screens go blank, the fan comes on for anywhere from ten to thirty seconds and then goes off by itself.

I do have a two-year service plan with Dell (with a year left) but going through all the phone options and speaking to a service rep who may not know about what he/she is speaking is not very appealing. I have tried to give as much information as possible about my setup and the problem but, if I have left out anything, it is certainly not intentional.

If anyone has any additional questions to better assess the situation or, if you know what the problem is already, please let me know. I am happy to share whatever you need in order to get to the bottom of the problem. Thanks so much in advance for everyone’s time and help. I look forward to hearing from some of you soon.

Best regards,

Jim
 

My Computer My Computer

At a glance

Windows11 Pro
OS
Windows11 Pro
Computer type
PC/Desktop
Manufacturer/Model
Dell
reboot and go into safe mode.. i believe* dell should be F12 at the POST screen (dell logo) to show the One Time Boot Menu. from there you should be able to show startup options (I'm not sure which option it is in the list). in startup options, you should be able to select Safe Mode. If Safe Boot does not display anything, that will rule out a drivers issue, as Safe Mode will load with basic display drives and not your nvidia drivers. Once you know that information, we can better determine a possible solution/route.


EDIT:

so you can go this route too, if you need to..
power on the computer and hold the button to turn it off once you see the Dell POST screen. do that twice and the third time the Dell POST screen should show "Attempting Repairs" or "Startup Repair" and then you can follow these steps straight from there:

Straight from Dell site:
  1. At the Choose an option screen, select Troubleshoot.
  2. At the Troubleshoot screen, select Advanced Options.
  3. At the Advanced Options screen, select Advanced Startup Options.
  4. Select Startup Settings.
  5. Select Restart.
  6. The computer restarts and enters the Startup Settings menu. Select 4 or F4 to start the computer in Safe Mode.
 

My Computer My Computer

At a glance

Windows 11 Pro
OS
Windows 11 Pro
It's a new computer, there should be a warranty of more than one year.
It is better to contact Dell Technical Support first.
I don't have any experience with tech support, but once in TeamGroup and quickly solved the problem by email.
 

My Computer My Computer

At a glance

Microsoft Windows 11 HomeIntel Core i5-13490F2 x 16 Patriot Memory (PDP Systems) PSD516G56...GIGABYTE GeForce RTX 4070 WINDFORCE OC 12G (G...
OS
Microsoft Windows 11 Home
Computer type
PC/Desktop
Manufacturer/Model
MSI MS-7D98
CPU
Intel Core i5-13490F
Motherboard
MSI B760 GAMING PLUS WIFI
Memory
2 x 16 Patriot Memory (PDP Systems) PSD516G560081 6400MT (32-37-37-74); 1.35V)
Graphics Card(s)
GIGABYTE GeForce RTX 4070 WINDFORCE OC 12G (GV-N4070WF3OC-12GD)
Sound Card
Bluetooth Аудио
Monitor(s) Displays
INNOCN 15K1F
Screen Resolution
1920 x 1080
Hard Drives
WD_BLACK SN770 250GB
KINGSTON SNV2S1000G (ELFK0S.6)
PSU
Thermaltake Toughpower GF3 1000W
Case
CG560 - DeepCool
Cooling
ID-COOLING SE-224-XTS / 2 x 140Mm Fan - rear and top; 3 x 120Mm - front
Keyboard
Corsair K70 RGB TKL
Mouse
Corsair KATAR PRO XT
Internet Speed
100 Mbps
Browser
Firefox
Antivirus
Microsoft Defender Antivirus
Other Info
https://www.userbenchmark.com/UserRun/66553205
Check the power connections on your graphics card for a start. Perhaps they have come loose, or aren't secure. Also, make sure that the graphics card is properly seated in its slot.

To me, this sounds like a graphics card problem, not the computer.

Does your i9 have integrated graphics? (I'm not sure about the i9, and you didn't specify which model) If so, try connecting the monitor(s) to the integrated displayport connector on the back and remove the graphics card. See if your monitors come back like they should.

Also, check your BIOS to see if somehow the boot graphics card has defaulted to integrated. Set it to PCIe so it boots with the 4070. Also check the BIOS to see if the USB settings for resuming from sleep are set properly. It should be something like "USB resume..." I don't know the exact wording on a Dell BIOS, but you get the idea, I hope. Maybe someone with more Dell experience can chime in here and provide us with the right wording for the setting so you can find it.
 

My Computer My Computer

At a glance

Win 11 Pro 25H2Intel i7 13700KF32 GB Team Group DDR5 - 6000 CL 30ASUS TUF GAMING RTX 3070 Ti
OS
Win 11 Pro 25H2
Computer type
PC/Desktop
Manufacturer/Model
Self build
CPU
Intel i7 13700KF
Motherboard
Gigabyte Z790 UD AC
Memory
32 GB Team Group DDR5 - 6000 CL 30
Graphics Card(s)
ASUS TUF GAMING RTX 3070 Ti
Sound Card
On board Realtek
Monitor(s) Displays
ACER 34 inch
Screen Resolution
4K
Hard Drives
1 TB Samsung 980 Pro Nvme, 1 TB Samsung 970 EVO Nvme, 2 x Samsung 970 2TB SSD SATA
PSU
EVGA 1000Q
Case
Rosewill something or other
Cooling
Noctua NH-D15. A whole schwak of Noctua case fans. $$$
Keyboard
Logitech G815
Mouse
Logitech G502 Hero
Internet Speed
700 up, 600 down
Browser
Firefox
Antivirus
MalwareBytes
Back
Top Bottom