SSD Drive Not Showing in Properties

PvtJohnTowle said:

I have a Corsair SSD drive , a very early iteration Force (??) It doesn't appear in My Computer and also in Disk Managment
It doesn't appear in Corsairs own software - Corsair SSD Toolbox

The drive is physically there in my computer. I thought it was the M drive . But it's not as I right click on it and it says USB SanSisk 3.2 Gen1 USB Device. It was a 120gb drive and this is the only drive that is near this capacity on computer.

Does this mean it's no good?

Click to expand...

imanlien2020 said:

Have you tried this?
Windows SSD not being recognized

Click to expand...

OH yes it found problems, but as soon as I clicked Start Repair, a purchase window popped up. I am concerned that these repairs requires me to call them (read the MS post) and they want access to my PC

On the evening that I downloaded the app, purchased 1 year of the Premium plan, I did as instructed on their site which is to call them. The website indicates to call to get your KEY license activated. But, I have discovered the purpose is to market to the customer! BEWARE!

Click to expand...

The person will ask one why they acquired Restoro. Then ask one numerous questions about how you use your computer. They request to get onto your PC

Click to expand...

PvtJohnTowle said:

So you are guaranteeing this is safe to install and use? I am not reading that here.

Click to expand...

Porthos said:

Restoro is crap. I think you are supposed to follow the manual directions on the page only.

Click to expand...

• Improper connections: The first thing to check if your SSD is not recognized on Windows 11 is the connection. If the SSD or the USB, in the case of an external drive is not connected correctly, you will encounter this issue.

• No drive letter assigned: The drive letter is essential for your OS to communicate with your hard drive. So if Windows 11 setup doesn’t detect your SSD, you might need to assign or change its drive letter.

• Misconfigured BIOS settings: Sometimes, your BIOS settings might be set to the old IDE compatibility mode. This can cause the new SSD to not show up in Disk Management on Windows 11. The solution here is to change the SATA mode to AHCI.

• Outdated SSD drivers: Outdated drivers are the chief cause of many issues. So, it is not surprising that you can face this issue if your SSD drivers are not up-to-date; you need to update your drivers to get past the problem here.

PvtJohnTowle said:

Thanks for the Malware too from Restoro, just ran MWB Premium Trial and 13 infections found all to do with Restoro uninstalled this POS ..

Click to expand...

PvtJohnTowle said:

I have a Corsair SSD drive , a very early iteration Force (??) It doesn't appear in My Computer and also in Disk Managment
It doesn't appear in Corsairs own software - Corsair SSD Toolbox

Click to expand...

Issues​

After the introduction of the SF-2000 series controller, some customers using drives with that controller reported issues such as BSOD and freezing. In early June 2011, Corsair Memory issued a recall on the 120 GB Force 3 with specific serial numbers, but not on any other Force 3 drive with a SandForce SF-2000 controller. Therefore, that recall does not appear to be related to the controller.[26] In October, 2011, SandForce sent out firmware updates through their manufacturing partners such as OCZ that fixed the reported issue.[27] In August 2012, TweakTown identified an issue with SandForce-based SSDs using firmware 5.0.1 and 5.0.2 wherein TRIM support did not perform optimally when fully erasing the SSD, but also confirmed that the 5.0.3 and 5.0.4 firmware resolved the issue.[28]

In 2012, SandForce SF-2000-based drives were discovered to only include AES-128 encryption instead of the advertised AES-256 encryption. It was speculated the lower grade encryption was used to qualify for US ITAR licences which are precluded for products featuring certain levels of encryption heading for a selected list of US-ambivalent or actively unfriendly countries.[29][30] Products such as Kingston SSDNow V+200 and KC100 were re-documented to state the use of 128-bit AES encryption.[31] Intel offered refunds for affected users of Intel 520 Series SSDs until January 1, 2012, while Kingston offered exchange program to cover the cost of shipping for customers who request a swap.[32]

Click to expand...

SandForce - Wikipedia

en.wikipedia.org

Porthos said:

I would just replace it.

Click to expand...

PvtJohnTowle said:

I have bought one of these

https://www.amazon.com.au/gp/product/B078211KBB/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

Click to expand...

Ghot said:

@PvtJohnTowle

Always check to see if the drive in question shows up in the BIOS.
If it doesn't show there... it won't show anywhere in Windows.

Click to expand...

Porthos said:

Personally, I have been using this brand for a couple of years for all of my clients with no issues.

https://www.amazon.com.au/Silicon-Power-3-year-warranty-SP512GBSS3A55S25/dp/B079SJ32TT/ref=sr_1_2?crid=EGD4DWHYYMKR&keywords=silicon%2Bpower&s=computers&sprefix=sil%2Ccomputers%2C139&sr=1-2&th=1

Click to expand...

PvtJohnTowle said:

I didn't see it in bios at all , Corsair not there nor the part number.

Click to expand...

PvtJohnTowle said:

why does it need a lithium ion battery if it internal drive?

Click to expand...

Porthos said:

WTH, Where did you get that idea?

Click to expand...

Winuser said:

Scroll down the page. It does say a Lithium battery is needed.

Click to expand...

PvtJohnTowle said:

The instructions aren't much better and not helpful the poster imanlien2020 didn't say that, the page is promoting Restoro and to download it to fix this problem.. Really poor advice then .

• Improper connections: The first thing to check if your SSD is not recognized on Windows 11 is the connection. If the SSD or the USB, in the case of an external drive is not connected correctly, you will encounter this issue.

I have already checked the connnection, it's plugged into the SATA and the power cable.

• No drive letter assigned: The drive letter is essential for your OS to communicate with your hard drive. So if Windows 11 setup doesn’t detect your SSD, you might need to assign or change its drive letter.

There are no unassigned drives in the Disk Management section

• Misconfigured BIOS settings: Sometimes, your BIOS settings might be set to the old IDE compatibility mode. This can cause the new SSD to not show up in Disk Management on Windows 11. The solution here is to change the SATA mode to AHCI.

Well I have a Samsung 840 EVO SSD connected and it is my boot (C:/ drive) and it s recognised and it is not a new SSD either. The Corsair was previously recognised.

• Outdated SSD drivers: Outdated drivers are the chief cause of many issues. So, it is not surprising that you can face this issue if your SSD drivers are not up-to-date; you need to update your drivers to get past the problem here.

Can't update the drivers if my PC cannot find the drive, as I stated Corsair SSD Toolbox doesn't find or recognise it.

Click to expand...