Solved Why a PC goes to sleep


lapetesson

Active member
Local time
11:39 AM
Posts
31
OS
Windows 11
I work on a Beelink SER5 PC (Ryzen 5 5500U) from another PC using the Remote Desktop Connection. I'm keen on keeping the Beelink up all the time. It is set in Settings->Power to never sleep. However, it systematically goes to sleep after its keyboard hasn't been used for several hours.

I've checked the BIOS, but there is nothing there that could explain this behavior. Beelink has practically no documentation, but there is a PDF showing some setup details with Windows 11 Settings. In particular, there is a document showing how to set up the PC to never sleep, and I did exactly that.

Is there any other setting in Windows to prevent a PC from sleeping? Could there be something special about Beelink?
 

My Computer My Computer

At a glance

Windows 11
OS
Windows 11
Manufacturer/Model
Beelink SER5 AM06PRO, Acer Aspire A515-43, Lenovo Thinkcentre-m92p
I work on a Beelink SER5 PC (Ryzen 5 5500U) from another PC using the Remote Desktop Connection. I'm keen on keeping the Beelink up all the time. It is set in Settings->Power to never sleep. However, it systematically goes to sleep after its keyboard hasn't been used for several hours.

I've checked the BIOS, but there is nothing there that could explain this behavior. Beelink has practically no documentation, but there is a PDF showing some setup details with Windows 11 Settings. In particular, there is a document showing how to set up the PC to never sleep, and I did exactly that.

Is there any other setting in Windows to prevent a PC from sleeping? Could there be something special about Beelink?
In sleep settings, do you have every single setting set to "no sleep"?

1694228537594.png
 

My Computers My Computers

  • At a glance

    Windows 11 Pro x64 24H2 v26200.5074AMD Ryzen 9 3600X 12-Core @ 3.80GHzCorsair 32GB DDR4EVGA GeForce gtx 1660 Super
    OS
    Windows 11 Pro x64 24H2 v26200.5074
    Computer type
    PC/Desktop
    Manufacturer/Model
    Built Myself in 2025
    CPU
    AMD Ryzen 9 3600X 12-Core @ 3.80GHz
    Motherboard
    MSI X570 Gaming Plus
    Memory
    Corsair 32GB DDR4
    Graphics Card(s)
    EVGA GeForce gtx 1660 Super
    Sound Card
    On Board
    Monitor(s) Displays
    2 X AOC 27" , Dell 27"
    Screen Resolution
    1920 X 1080
    Hard Drives
    ~~~~~~~~~~~~~~~~~~~~~~~~~~
    ~ P34A60 512GB NVMe PCIe Gen3x4 M.2
    ~ 6TB Toshiba HDD
    ~ 6TB HDD (Backup)
    ~ SanDisk 250GB SSD
    ~ 2 X 1TB HDD
    ~~~~~~~~~~
    PSU
    eVGA 750w G+
    Case
    GAMDIAS White ATX Mid Tower Gaming Computer PC Case w/Tempered Glass
    Cooling
    AMD Wraith Prism
    Keyboard
    Nulea RT05 Wireless Ergonomic
    Mouse
    Nulea MD280 Wireless Vertical Mouse
    Internet Speed
    761Mbps (Download) / 692Mbps (Upload)
    Browser
    Firefox
    Antivirus
    Malwarebytes
    Other Info
    *This is my Main Computer That I use*
  • At a glance

    Windows 11 Pro x64 24H2 v26100.2894AMD Ryzen 7 1800X @ 3.60Ghz16GBAMD RX580
    Operating System
    Windows 11 Pro x64 24H2 v26100.2894
    Computer type
    PC/Desktop
    CPU
    AMD Ryzen 7 1800X @ 3.60Ghz
    Motherboard
    Asus Crosshair VI Hero
    Memory
    16GB
    Graphics card(s)
    AMD RX580
    Sound Card
    onBoard
    Monitor(s) Displays
    LG 27UK650-W 27", eMachine 22"
    Screen Resolution
    1920 X 1080
    Hard Drives
    250GB SSD
    PSU
    CORSAIR RM850
    Case
    GAMDIAS Black ATX Mid Tower Gaming Computer PC Case w/Tempered Glass
    Cooling
    Liquid
    Keyboard
    Nulea RT05 Wireless Ergonomic
    Mouse
    Nulea MD280 Wireless Vertical Mouse
    Internet Speed
    752Mbps (Download) / 537Mbps (Upload)
    Browser
    Firefox
    Antivirus
    Malwarebytes
    Other Info
    I use this computer for photo/video editing and to track severe weather
There may be an EF member that has tried this Microsoft software:


PowerToys Awake is a tool for Windows designed to keep a computer awake without having to manage its power & sleep settings.

This can be helpful when running time-consuming tasks, ensuring that the computer does not go to sleep or turn off its screens.

 

My Computer My Computer

At a glance

Windows 10Intel(R) Core(TM) i7-4800MQ CPU @ 2.70GHz16 GB Total: Manufacturer : Samsung MemoryTyp...NVIDIA Quadro K3100M; Intel(R) HD Graphics 4600
OS
Windows 10
Computer type
Laptop
Manufacturer/Model
HP
CPU
Intel(R) Core(TM) i7-4800MQ CPU @ 2.70GHz
Motherboard
Product : 190A Version : KBC Version 94.56
Memory
16 GB Total: Manufacturer : Samsung MemoryType : DDR3 FormFactor : SODIMM Capacity : 8GB Speed : 1600
Graphics Card(s)
NVIDIA Quadro K3100M; Intel(R) HD Graphics 4600
Sound Card
IDT High Definition Audio CODEC; PNP Device ID HDAUDIO\FUNC_01&VEN_111D&DEV_76E0
Hard Drives
Model Hitachi HTS727575A9E364
Antivirus
Microsoft Defender
Other Info
Mobile Workstation
@JAM83:
No. This is a desktop, so it has just these two settings: "put device to sleep" and "turn off screen". The former is set to Never. The screen is turned off after three minutes.

The Remote Desktop Connection does work for several hours even though Beelink's screen is off, so I believe the screen has nothing to do with this. After approximately four hours, Beelink goes to sleep, and an attempt to connect using the Remote Desktop Connection fails.
 

My Computer My Computer

At a glance

Windows 11
OS
Windows 11
Manufacturer/Model
Beelink SER5 AM06PRO, Acer Aspire A515-43, Lenovo Thinkcentre-m92p
@zbook:
Thank you for this hint. I'll try PowerToys Awake if I don't find any other solution, based on settings. I added a new comment to this thread; I believe there is a solution.
 

My Computer My Computer

At a glance

Windows 11
OS
Windows 11
Manufacturer/Model
Beelink SER5 AM06PRO, Acer Aspire A515-43, Lenovo Thinkcentre-m92p
EDIT after more tests:

The reported unwanted behavior occurs when connecting to Beelink through WiFi. I also connect from another PC through a wired connection and a router. Here, the Remote Desktop Connection gets through even when Beelink sleeps. The two network interfaces on Beelink, WiFi and wired, are set up in the same way, but the wired interface wakes up Beelink and WiFi does not.

The interfaces were set to "Allow this device to wake the computer". I've now modified the WiFi interface by unchecking "Allow the computer to turn off this device to save power". I'll know in a few hours if it does the trick. This does not answer the question of why Beelink sleeps, but for me, it could be an even better solution.

This text should be a part of the original question, but I'm not allowed to change it.
 
Last edited:

My Computer My Computer

At a glance

Windows 11
OS
Windows 11
Manufacturer/Model
Beelink SER5 AM06PRO, Acer Aspire A515-43, Lenovo Thinkcentre-m92p
As all my attempts to keep the PC up using Windows settings failed, I've tried the PowerToy Awake tool. It does keep the PC up, but it's not what I want. It opens a console window and places an icon on the taskbar, while I want an invisible background process. Since the only thing necessary to keep the PC up is a single WINAPI call

SetThreadExecutionState(ES_CONTINUOUS | ES_SYSTEM_REQUIRED);

I decided to create a small app of my own. It only needs to contain the above call and an endless loop to keep it alive, because Windows reverts the call to SetThreadExecutionState if the app dies.
 

My Computer My Computer

At a glance

Windows 11
OS
Windows 11
Manufacturer/Model
Beelink SER5 AM06PRO, Acer Aspire A515-43, Lenovo Thinkcentre-m92p
EDIT after more tests:

The reported unwanted behavior occurs when connecting to Beelink through WiFi. I also connect from another PC through a wired connection and a router. Here, the Remote Desktop Connection gets through even when Beelink sleeps. The two network interfaces on Beelink, WiFi and wired, are set up in the same way, but the wired interface wakes up Beelink and WiFi does not.

The interfaces were set to "Allow this device to wake the computer". I've now modified the WiFi interface by unchecking "Allow the computer to turn off this device to save power". I'll know in a few hours if it does the trick. This does not answer the question of why Beelink sleeps, but for me, it could be an even better solution.

This text should be a part of the original question, but I'm not allowed to change it.
You seems to be using wake on LAN. Wireless wake on LAN does not work.
 

My Computer My Computer

At a glance

Windows 11i58GB
OS
Windows 11
Computer type
Laptop
Manufacturer/Model
Acer
CPU
i5
Memory
8GB
Browser
Edge
You seems to be using wake on LAN. Wireless wake on LAN does not work.
Could you show a link to this information? Perhaps some Microsoft text?
 

My Computer My Computer

At a glance

Windows 11
OS
Windows 11
Manufacturer/Model
Beelink SER5 AM06PRO, Acer Aspire A515-43, Lenovo Thinkcentre-m92p
Back
Top Bottom