WSCC (Windows System Control Center)


WSCC allows you to install, update, execute and organize the utilities from various system utility suites. WSCC can install and update the supported utilities automatically. Alternatively, WSCC can use the http protocol to download and run the programs. The portable edition doesn't require installation and can be run directly from a USB drive.

WSCC supports the following major utility suites:
  • Sysinternals Suite
  • NirSoft Utilities
  • and more...
Click to expand...


KLS SOFT - WSCC - Windows System Control Center

www.kls-soft.com www.kls-soft.com

Version History:

10.0.1.0 (September 10, 2025)
  • [CHANGED] Update Manager: improved security
  • [FIXED] the starting directory was not set correctly when launching an app
  • [FIXED] fixed a crash that could occur when running a command line app
  • [FIXED] minor fixes and improvements
10.0.0.8 (June 2, 2025)
  • [CHANGED] Update Manager: scheduled updates will run even if WSCC is already running
  • [CHANGED] minor user interface improvements
10.0.0.7 (May 6, 2025)
  • [CHANGED] Update Manager: supports 64-bit only apps
  • [FIXED] minor fixes
Click to expand...

Full history at WSCC - History

Free for personal use.

I use this pretty regularly, as it has every NirSoft utility and every SysInternals utility readily available. It's also started to include some other utilities, as well, like MiTec utilities, Everything, all the various PuTTy apps, GRC's DNS Benchmark utility, Sumatra PDF, GRC's InSpectre, and even links to Windows System utilities. Now it even has Rufus.

It has both fully portable and installable versions, and while it does say you haven't registered in the about screen, there are no other nags, and it is fully usable and updatable. If you download the portable version, the updater updates you with the portable version, as well, so directly updatable from inside the software.
 
Last edited:
Click to expand...
tzr916 said:
How do I get WSCC to recognize previously installed Sysinternals Suite?
Click to expand...
It's a little clunky to set up but you only have to do it once.
Under Settings, Software, you will be able to change the local path as pictured below.
Use the small icon to the bottom right to transverse directories.

Screenshot 2026-10-16 224902.webp
 

My Computers My Computers

System One System Two

  • At a glance

    All Branches but StableAMD Ryzen 7 7735HS 3200-4500 Mhz 8 cores x 232 GB DDR5Radeon Graphic / NVIDIA GeForce RTX 4060 8 GB...
    OS
    All Branches but Stable
    Computer type
    Laptop
    Manufacturer/Model
    Acer Nitro ANV15-51
    CPU
    AMD Ryzen 7 7735HS 3200-4500 Mhz 8 cores x 2
    Motherboard
    Sportage_RBH
    Memory
    32 GB DDR5
    Graphics Card(s)
    Radeon Graphic / NVIDIA GeForce RTX 4060 8 GB GDDR6
    Sound Card
    AMD/Realtek(R) Audio
    Monitor(s) Displays
    Integrated Monitor (15.3"vis)
    Screen Resolution
    FHD 1920X1080 16:9 144Hz
    Hard Drives
    KINGSTON OM8SEP4512Q-AA 1TB
    Western Digital 256GB
    PSU
    19V DC 6.32 A 120 W
    Cooling
    Dual Fans
    Mouse
    MS Bluetooth
    Internet Speed
    Fiber 1GB Cox -us & 1GB Orange-fr
    Browser
    Edge Canary- Firefox Nightly-Chrome Dev-Chrome Dev
    Antivirus
    Windows Defender

  • At a glance

    Windows 11 BetaAMD A9-94208 GB of DDR4AMD Radeon R5
    Operating System
    Windows 11 Beta
    Computer type
    Laptop
    Manufacturer/Model
    Asus X751BP
    CPU
    AMD A9-9420
    Memory
    8 GB of DDR4
    Graphics card(s)
    AMD Radeon R5
    Screen Resolution
    1600x900
    Hard Drives
    Seagate 1 TB
Well, I put in my Sysinternals directory and they all popped up on the main WSCC page. Then when I clicked update, all of them were blank where it should show their "current version". So I checked the box to select all 70 items and clicked on Install... As it went through each one it started showing the current version, which was the latest, and every one then said "Failed to Install" with this is the log (70 times):
Code: 
[ERROR] Failed to extract file progname.exe. System Error. Code: 1920. The file cannot be accessed by the system. [E701920]
[ERROR] AccessChk is not installed.
[ERROR] Cannot install AccessChk 6.15. (failed to install) [E4281]
And at the end said:
Code: 
70 new software are available.
[ERROR] 70 new software were failed to install.
So I restarted WSCC. The main WSCC page does now show the version numbers and correct location path, but when I try to launch any of them I just get "ERROR progname is not installed Search path: C:\User....\Microsoft.SysinternalsSuite_8wekyb3d8bbwe".
 

My Computers My Computers

System One System Two

  • At a glance

    Windows 11 ProIntel Core i7-11700k16GB Patriot Viper Steel @ DDR4-3200RTX2070
    OS
    Windows 11 Pro
    Computer type
    PC/Desktop
    Manufacturer/Model
    ASUS z590
    CPU
    Intel Core i7-11700k
    Motherboard
    ASUS z590
    Memory
    16GB Patriot Viper Steel @ DDR4-3200
    Graphics Card(s)
    RTX2070
    Monitor(s) Displays
    Sony XBR65Z9D
    Hard Drives
    1TB Crucial T500 M.2 PCIe Gen4 + many SATA + many USB
    PSU
    AS Rock Steel Legend 850W
    Case
    Silverstone
    Internet Speed
    1Gbps

  • At a glance

    Windows 11 ProIntel Core Ultra 7 255H32GB Samsung LPDDR5-8533NVIDIA GeForce RTX 5060 Laptop GPU
    Operating System
    Windows 11 Pro
    Computer type
    Laptop
    Manufacturer/Model
    Lenovo T1G Gen 8
    CPU
    Intel Core Ultra 7 255H
    Motherboard
    21TD000LUS
    Memory
    32GB Samsung LPDDR5-8533
    Graphics card(s)
    NVIDIA GeForce RTX 5060 Laptop GPU
    Monitor(s) Displays
    16" WQUXGA IPS HDR+DoVi
    Screen Resolution
    3840x2400
    Hard Drives
    1TB M.2 PCIe Gen5 NVMe
    Keyboard
    Redragon S113-KN-DE (Brown switches)
    Mouse
    Logitech MX Ergo S
    Internet Speed
    1Gbps
You must log in or register to reply here.

Similar threads

  • Article Article
Logitech Unveils MX Keypad for Developers: The Customizable Multi-App AI Control Center
Replies
0
Views
295
Brink
Brink
  • Article Article
Windows Admin Center version 2606 is now generally available
Replies
0
Views
603
Brink
Brink
Clevo/Sager Control Center 3.0 v6.042 has broken a few days ago and breaks again even after workaround.
Replies
10
Views
19K
repoman
repoman
WSCC - Windows System Control Center
Replies
3
Views
3K
Almighty1
Almighty1
Video Guide: How to disable the Killer Control Center
Replies
2
Views
3K
Spartan
Spartan

Latest Support Threads

Latest Tutorials

Back
Top Bottom