AlexViktor
New member
- Local time
- 11:41 AM
- Posts
- 4
- OS
- 11
Hello, i recently bought and put together a GX501GL with parts found over aliexpress and the internet, except the Monitor, i am using an external portable monitor through the HDMI output on the device!! Installed Windows 11 with original ISO using the Media Creation Tool to obtain, and using Rufus onto a flashdrive to install. No issue here until driver updates started. I figured it must be the GPU driver acting up, since the moment it fully installed the external Monitor was blinking once or twice, and then nothing, black screen without any response. Apparently not receiving any signal! I restarted the Notebook, Bios flash screen shows up, recovery screen shows up, but once it tries to get into Windows 11 the device is stuck with a black screen. Is there any way around this issue?
Trying to prevent the update from happening was one way which I tried often enough to narrow the issue down onto the GPU driver force installing. I wish to have the latest driver installed to have a fully working System and not potentialy later being surprised by a bricked device because of a later GPU driver update. So here is my guess;
Since the Device comes without a monitor, there is no way i can test the internal monitor device (eventually, that would be the last step). I want to force only using the external HDMI output despite being a monitor installed, as well preventing FN + F6 from happening. You are amazing guys on this forum which eventually have one or two reg files coming my way, to accomplish these two essential steps, summing up which would be and what I need;
- forcing only the external HDMI output of the device being in use
- preventing disabling monitor locking FN + F6 never / or always to happen. (since I am using the external output)
(pic of Asus Rog Zephyrus GX501GL)
Trying to prevent the update from happening was one way which I tried often enough to narrow the issue down onto the GPU driver force installing. I wish to have the latest driver installed to have a fully working System and not potentialy later being surprised by a bricked device because of a later GPU driver update. So here is my guess;
Since the Device comes without a monitor, there is no way i can test the internal monitor device (eventually, that would be the last step). I want to force only using the external HDMI output despite being a monitor installed, as well preventing FN + F6 from happening. You are amazing guys on this forum which eventually have one or two reg files coming my way, to accomplish these two essential steps, summing up which would be and what I need;
- forcing only the external HDMI output of the device being in use
- preventing disabling monitor locking FN + F6 never / or always to happen. (since I am using the external output)
(pic of Asus Rog Zephyrus GX501GL)
- Windows Build/Version
- latest, using media creation tool, date
My Computer
System One
-
- OS
- 11
