Solved Can;t Boot Into Windows After Trying to Make Image

I finally killed my wife's Dell Inspiron 7591 2n1 (see computer specs). When I boot I get an error message Erroc Code 0x0000225 Your PC/Device needs to be repaired, A required device isn't connected or available.

A couple days ago I started to make a new Macrium Reflect image as I always do and when Reflect started got the error message Cluster run error, invalid cluster number - Error code =6. Please run chkdsk /r I've been trying to work through this and found on Macrium's web site: "
This particular error is caused by a corrupt FAT32 file system where the FAT table includes a cluster run beyond the end of the file system. This will be corrected by running 'chkdsk', however, there appears to be no drive letter associated with the drive that has the error. Is this a GPT/UEFI booting system and does the error only occur when imaging the EFI system partition? This is the small FAT32 partition usually partition 1 or 2 at the beginning of the disk. You can confirm this by excluding the FAT32 system partition from the image to see if it completes successfully.
Also run chkdsk on the Recovery partition if needed."

Today I used a Minitool Rescue Disk to change the drive letter from None to M. I didn't apply this change as I opened CMD to check to confirm the drive letter an couldn't get be to Partition Wizard. So I just ran DISKCHK to make the change and then ran "chkdsk E: /r" and saw that some corrections were applied.

But when I rebooted the machine won't go to Windows! I'm panicking now.

I was able yesterday to install Hasleo, but making a full disc image also failed, but I was able to make an image of the C: drive just in case.

So I have a Macrium Rescue disk, a Mini tool Rescue Disk, backup images of Macrium, and the Hasleo image of C:.

I'm at a loss where to go from here!
John

Use macrium reflect rescue media to fix Windows 11.

Well, first the bad news. How it happened I will never know but the C/: drive got deleted. It is utterly bizarre. I was just working with the EFI system partition. But there it is. Fortunately the Lord had me download Hasleo and even though a disk image failed to be completed,, I was able to made a partition image of the C drive. So after sweating for a couple hours trying to get the machine to boot using tools from MiniTool and Macrium Reflect's emergency disk I did restore the EFI partition from an August image of Reflect) I am 71% of the way through restoring the C drive. No wonder the machine wouldn't boot - no C/ drive with Windows!

So that is the state of things at the moment, I am praying constantly for our Lord's graciousness!

John

Well, thank you Jesus!!! The restoring of the C drive via Hasleo was successful, and no Error code =6 as I am making a new FULL image with Reflect. So that 1 intermediate step of replacing the System image from an old Reflect image worked! Thank you, thank you Lord! Now I can breath.

EDIT - it was an ESP partition, just to be accurate, that had a "a cluster run beyond the end of the file system"