Quexos
Well-known member
- Local time
- 5:50 AM
- Posts
- 18
- OS
- Windows 10 21H1
EDIT: Solution, TPM on my Asrock B450 board is not just a 1 step process. I had to enable fTPM, reboot, then also go to a different section, Trusted Computing, and enable the "security device" there. So it is a couple of switches and reboots in different locations in my BIOS/UEFI.
I created an ISO via UUP Dump, extracted it to a gpt, fat32, 8 GB, USB drive (which booted into setup no problem), and set my PC to meet all the "known" requirements but got the "This PC is not compatible" error upon selecting the drive on which to install. Secureboot =on, fTPM = on, GPT partition type on a 500 GB M.2 (Sata) SSD.
Is there any key required? I skipped it via "I don't have a key".
Something else I may have overlooked? I usually run good old legacy, MBR, with all the above nonsense off.
Basic specs: Ryzen 5 2600, on ASRock B450 board, 16GB RAM, GTX 1660 Super.
Partitioned via diskpart like so:
1. create partition efi size=100
format fs=fat32 quick label="system"
2. create partition msr size=16
3. create partition primary size=468992
format fs=ntfs quick label="WIN11"
assign letter="W"
4. create partition primary size=450
format fs=ntfs quick label="WinRE"
set id="de94bba4-06d1-4d40-a16a-bfd50179d6ac"
I created an ISO via UUP Dump, extracted it to a gpt, fat32, 8 GB, USB drive (which booted into setup no problem), and set my PC to meet all the "known" requirements but got the "This PC is not compatible" error upon selecting the drive on which to install. Secureboot =on, fTPM = on, GPT partition type on a 500 GB M.2 (Sata) SSD.
Is there any key required? I skipped it via "I don't have a key".
Something else I may have overlooked? I usually run good old legacy, MBR, with all the above nonsense off.
Basic specs: Ryzen 5 2600, on ASRock B450 board, 16GB RAM, GTX 1660 Super.
Partitioned via diskpart like so:
1. create partition efi size=100
format fs=fat32 quick label="system"
2. create partition msr size=16
3. create partition primary size=468992
format fs=ntfs quick label="WIN11"
assign letter="W"
4. create partition primary size=450
format fs=ntfs quick label="WinRE"
set id="de94bba4-06d1-4d40-a16a-bfd50179d6ac"
Last edited:
My Computer
System One
-
- OS
- Windows 10 21H1
- Computer type
- PC/Desktop
- Manufacturer/Model
- Custom
- CPU
- Ryzen 5 2600
- Motherboard
- Asrock B450 Gaming K4
- Memory
- 2x8 GB 16-18-18-36 tRC-56 DDR4 3200
- Graphics Card(s)
- GTC 1660 Super
- Screen Resolution
- 1920x1080
- Hard Drives
- 1 NVME, 1 SATA M.2 SSDs
- PSU
- Antec TP750
- Antivirus
- nope