Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This may help make sense of it....Read something about parallel operation, not that it made a lot of sense.
Single-channel 2133 MHz DDR4 delivers 17 GB/s of memory bandwidth. If you have a pair of 2133 MHz DDR4 modules in dual-channel, your memory bandwidth doubles to 34 GB/s. The only way to hit that level of performance in single-channel mode is to use memory modules running at 4000 MHz or higher.
www.hardwaretimes.com
I believe this depends on the Mhz. If it's 3000 (I believe) or above, you have to enable XMP in your BIOS to take advantage of the speed. Some mother boards might have this automatically enabled.Only thing I've seen about dual-channel [disregarding the speed] is that some BIOSes won't automatically set it as dual-channel and some will, just something to check on.
Read something about parallel operation, not that it made a lot of sense.
Also appreciate comments about the pros and cons of former vs latter, thanks!


Thanks for this information. I was curious about this, so I ran a search on it in Bing. This is the page, which is pretty informative, is what I found:Normally in Windows 10 and 11 the best performance is by using the High Performance plan in Power settings. There is one higher performance plan called Ultimate Performance plan hidden by default and only shown on Windows 10/11 Pro for Workstations version. There is a command prompt code to reveal the Ultimate Performance plan in Windows 10/11 Home and Pro versions. When selected it makes the turbo boost of the CPU to be always enabled, so the computer works always at maximum speed. The only drawback is that it consumes more power, so it is not recommended for notebooks or the battery will drain sooner. I am posting this from my mobile, so I cannot copy-paste the code right now. I'll do it tomorrow.
Quick question, Ghot. Assuming that you have 2x16 3200MHz in your system and want to add 2x8 more or 2x16 more, aside from ensuring that they're the same MHz, should you get pairs that match, or can you use any matched pair in the other two slots? Often, they'll discontinue a certain RAM chip, so you're left with purchasing a different pair. I've never really given this much thought until seeing your post here.Last but not least... when buying RAM always buy "sets", and make sure they are composed of as few sticks as possible.
If you want 32GB of RAM and have a dual channel board... get a "set" of (2 x 16GB).
If you want 16GB get a (2 x 8GB), set.
It's a lot easier to make a "matched" set with only two sticks, than it would be with four sticks.
And the more "matched" the RAM sticks are... the more stable they will be.
Do you happen to have the code? Im curious to see if theres a difference, Im on the high performance plan and my turbo speed is always enabled too.Normally in Windows 10 and 11 the best performance is by using the High Performance plan in Power settings. There is one higher performance plan called Ultimate Performance plan hidden by default and only shown on Windows 10/11 Pro for Workstations version. There is a command prompt code to reveal the Ultimate Performance plan in Windows 10/11 Home and Pro versions. When selected it makes the turbo boost of the CPU to be always enabled, so the computer works always at maximum speed. The only drawback is that it consumes more power, so it is not recommended for notebooks or the battery will drain sooner. I am posting this from my mobile, so I cannot copy-paste the code right now. I'll do it tomorrow.
The site I link to in Post #14 has code that will enable it. Alternatively, you can use @FreeBooter's batch script file in Post #15 to enable it.Do you happen to have the code? Im curious to see if theres a difference, Im on the high performance plan and my turbo speed is always enabled too.
Ahh my bad missed that, I added it anyways and its identical to my high performance plan anyway so no need for me, I must have changed some of the settings at one point or another to match ultimate when it wasn't there lol.The site I link to in Post #14 has code that will enable it. Alternatively, you can use @FreeBooter's batch script file in Post #15 to enable it.