Solved Microsoft blocks all options to bypass MS Account on new Installs

jimbo45 · Oct 31, 2023

hsehestedt said:
Testing with Home edition now. But I already know for 100% sure that one of the methods will work with Home Edition, and that is the answer file. I'll post back results shortly.

Thanks !!

cheers
jimbo

hsehestedt · Oct 31, 2023

Test results:

The method of entering a fake account name DOES WORK

The method of using OOBE\BypassNRO DOES WORK

The method of selecting "Set up for work or school" DOES NOT WORK because this is not an option that is presented to Home edition installations.

The method of using an answer file DOES WORK

Once again, note that all of these were tested with 22621.2506 Home Edition.

hsehestedt · Oct 31, 2023

One additional comment: I think that a lot of the procedures that I have seen for using the OOBE\BypassNRO have you run that command several screens past where I do it. I find that there is no need to go that far. As I noted in my detailed procedures above, I do this at the first static screen after Windows setup reboots where you are presented a screen asking "Is this the right country or region?"

hsehestedt · Oct 31, 2023

Man, I really gotta learn to sleep at night. I was not well yesterday and yet I still persist in playing with this stuff all night. I think that I am going to sign off shortly and get some shut eye

.

spapakons · Oct 31, 2023

I would not like to use UUP Dump, so I wait a few more days for Microsoft to put the official 23H2 on their download site. However, I have to point out that you must be diconnected from the internet for any of the tricks to work. That means for a desktop disconnect the LAN cable before going through the intitial configuration and for a laptop DON'T connect to Wi-Fi obviously. Then make sure you type the command as oobe\bypassnro (with \ which means run utility bypassnro from folder oobe) and not with / (which means run non-existing utility oobe with parameter bypassnro). I don't judge here, I have done this common mistake as well, but being familiar with DOS I realized it and used the correct syntax. Using the command correctly you will see some code making changes and the computer will automatically restart. You eill start the configuration from the country again, but this time you should see the text "I don't have an internet connection" at the network setup screen. Click on that to create a local account instead. Needless to say stay disconnected from the internet until all the configuration is over and you see the desktop of your local account!

jimbo45 · Oct 31, 2023

hsehestedt said:
Man, I really gotta learn to sleep at night. I was not well yesterday and yet I still persist in playing with this stuff all night. I think that I am going to sign off shortly and get some shut eye .

Hi there
I wondered what you are doing at around 05.00 your local time !!!!!

at least in Texas I'd imagine it will be warmer than this :

cheers
jimbo

spapakons · Oct 31, 2023

Here in Greece we still have summer temperatures. In the morning it is like 19-20 degrees Celsius and later it can be 25-26. At least we don't have to bare the cost of heating yet...

Bree · Oct 31, 2023

Spitz said:
I have been attempting to install version 22631.2506 via ISO install to my notebook.

Previous attempts to by pass the MS Account requirement have not been an issue.

Version 23H2 appears that MS have used the anti and blocked all possible options including Rufus & NT Lite versions.

Welcome to Eleven Forum.

Where did you get the ISO? 22631 (23H2) has not yet been officially released to the public by Microsoft.

glasskuter said:
However, know that some of Windows 11 features (like co-pilot) require a MS account.

Yes, an MS account is required, but you don't have to sign into Windows with it. A Local account with an MS account that can be used by other apps is sufficient.

Add Microsoft account to Local account for Hybrid account in Windows 11

A Microsoft account (MSA) is a good choice if a user wants to use the same account on multiple devices, or wants to make it easy to use all / any Microsoft services. Setting up a preinstalled Windows 10 on a new device, after a clean install, or creating a new user on existing Windows...

www.elevenforum.com

Berton · Oct 31, 2023

I did a clean re-install of Home edition Saturday on a Notebook and it also required an MS Account so I did it using a non-main account, got it all updated then added a new User account as Local Account with Admin right, rebooted into it and removed the User with MS Account, so far no issue. Only Caveat, the second account has to have a different User name by at least one character or all documents/data will end up in the only folders under C:\Users\USERNAMEHERE\, hard to separate.

EDIT: I forgot to mention that I use the Bootable USB Thumb drive created using Microsoft's MCT/Media Creation Tool process, hasn't failed me yet.

Josey Wales · Oct 31, 2023

There is no way to get around all of MS's B$ so I just deal with it and use Linux on a NUC. The Best way maybe to just do a Clean install and use all of their bloatware. One could save a great deal of money-No need for 3rd party apps, no need for Macrium. If you have a problem just do another Clean install. Just a thought

kelper · Oct 31, 2023

This may still work - anyone tried recently?

Ventoy bypasses Windows 11 hardware and online account requirement by default

gHack's Ventoy article The new Ventoy version improves the installation of Microsoft's Windows 11 operating system further. The main improvement in the new release enables two Windows 11-specific bypass options by default. VTOY_WIN11_BYPASS_CHECK -- this bypasses the hardware compatibility...

www.elevenforum.com

dacrone · Oct 31, 2023

Yeah yeah yeah. Typo fixed, even though it has been corrected by every reply lol. Bottom line is that nothing has changed. Bypass methods still work. Case closed.

Brink · Oct 31, 2023

You can still use the method in step 21 below to set up a local account while doing a clean install of Windows 11.

Clean Install Windows 11

This tutorial will show you step by step on how to clean install Windows 11 at boot on your PC with or without an Internet connection and setup with a local account or Microsoft account. Windows 11 has all the power and security of Windows 10 with a redesigned and refreshed look. It also comes...

www.elevenforum.com

hsehestedt · Oct 31, 2023

Sigh. I'm waiting for the final release of 23H2, but right now the very latest (22621.2506) is still working with all the methods I posted earlier. We are so close to final release that I just can't bring myself to seeing MS doing anything drastic at this point.

stormboy · Nov 2, 2023

jimbo45 said:
Perhaps they should kick the dog more often

Umm.... guess you are not a dog lover. What the poor dog ever do to you?

ian50 · Nov 2, 2023

As my earlier comment here showed, when using Rufus 4.3 (portable) and an ISO of 23H2 from UUPDUMP.NET or .CN for an inplace upgrade, you get all the usual 6 tickboxes from Rufus, including Local Account. Nothing has changed.

The objection to using UUPDUMP is individual, but so be it. So three days ago I tried with a brand new ISO downloaded from Microsoft, just to see if Rufus would use the 6 tickbox page to make a USB bootable for clean install. The ISO supplied by MS is now named as 23H2, 6.7Gb. Rufus had no problem in offering the 6 tickboxes including Local Account to form a bootable ISO for a clean install. Nothing has changed.

And MS is now downloading a 23H2 ISO file on request, so 22631.2506 as an ISO is most definitely released, other than the UUPDUMP site.

jimbo45 · Nov 3, 2023

stormboy said:
Umm.... guess you are not a dog lover. What the poor dog ever do to you?

Actually I have 2 big rottweiler's kicking those wouldn't be a great idea !!!-- the expression wasn't meant to be taken literally !!!

cheers
jimbo

stormboy · Nov 3, 2023

Kinda what I thought, but had to make a comment

hsehestedt · Nov 3, 2023

Been ill last couple days, but still managed to do some testing.

Using build 2428, I can do all the usual things - I can upgrade an existing installation of Windows by replacing appraiserres.dll with a copy from Win 10 and I can use the registry entry to bypass CPU and TPM requirements.

For a clean install, all the usual tricks not involving any third-party tools are still working for me. Likewise for creating a local user account. And I do mean all of them. If you need this spelled out, let me know

.

The one place that I have a problem is after slipstreaming in the build 2506 updates. I simply could not get setup to run in order to do an upgrade installation. I was sure that the issue was my program, but after hours and hours of testing I am now 99.9% sure that the issue is not my program. It seems directly related to the widespread reports of problems with that update.

So, at least for me, my strategy for now is to either do a clean install or upgrade installation going first to build 2428 and then updating to 2506.

I think I've done roughly 7 or 8 machines so far and all are running 23H2 flawlessly.

EDIT: I forgot to mention that probably about 4 of these are systems that are technically unsupported and they all run 23H2 just fine.

Berton · Nov 3, 2023

I've gotten 4 machines on 23H2, only issue was with the last one that hadn't gotten KB5027397, once that was done all is good.

Solved Microsoft blocks all options to bypass MS Account on new Installs

Well-known member

My Computer

Well-known member

My Computers

Well-known member

My Computers

Well-known member

My Computers

Well-known member

My Computers

Well-known member

My Computer

Well-known member

My Computers

Well-known member

My Computers

Well-known member

My Computers

Endeavor to Persevere

My Computers

Well-known member

My Computers

Well-known member

My Computer

Administrator

My Computers

Well-known member

My Computers

New member

My Computer

Well-known member

My Computer

Well-known member

My Computer

New member

My Computer

Well-known member

My Computers

Well-known member

My Computers