Power Options

Neophile · Jun 15, 2025

The time for hibernation after sleep is no longer available on power config Advanced Settings as it used to be. I used the command
powercfg /hibernate on, but nothing changed.

How can I adjust the time for hibernation?

My specs are up-to-date.

antspants · Jun 15, 2025

If of any use.

Change When to Put Computer to Sleep Timeout in Windows 11

This tutorial will show you how to change how long after your computer is inactive (idle) before automatically put to sleep in Windows 11. Sleep uses very little power, your PC starts up faster, and you’re instantly back to where you left off. You don’t have to worry that you'll lose your work...

www.elevenforum.com

Enable or Disable Hibernate in Windows 11

This tutorial will show you how to enable or disable hibernate and restore or delete the hiberfil.sys file in Windows 11. Hibernate is a power-saving state designed primarily for laptops, and might not be available for all PCs. (For example, PCs with Modern Standby may not have hibernate...

www.elevenforum.com

Hibernate Computer in Windows 11

This tutorial will show you different ways on how to hibernate your Windows 11 computer. Hibernate was designed for laptops and might not be available for all PCs. (For example, PCs with Modern Standby may not have the hibernate option.) Hibernate uses less power than sleep and when you start...

www.elevenforum.com

Change Power Plan Settings in Windows 11

This tutorial will show you how to change the settings of a power plan to customize how you want in Windows 11. A power plan is a collection of hardware and system settings that manages how your computer uses power. Power plans can help you save energy, maximize system performance, or achieve a...

www.elevenforum.com

pepanee · Jun 15, 2025

Check out the answer provided here:

No hibernation option "after X minutes of inactivity" in Windows 11

I don't see the "hibernation after X minutes" option in my Windows 11. On other computers I had, there was an option in Control Pane > Power Options > Change plan settings > Cha...

superuser.com

hdmi · Jun 16, 2025

powercfg -attributes sub_sleep hibernateidle -attrib_hide

Neophile · Jun 24, 2025

My problem is not to get hibernate, which I already have, but being able to adjust its timing after sleep. I thought my post was clear, but for the answers I recognise it was not. I set the manual hibernation for when I press the power button, but I cannot adjust the automatic timing after sleep.

pepanee

I already have a registry entry similar to that one in Advanced settings, but no “Hibernate after”. Please, have a look at the attached registry subkey from my registry and tell me what you think.

pepanee · Jun 24, 2025

Aren't you looking for this option?

If that's what you're looking for, then check out the link I posted above.

Neophile · Jun 24, 2025

I read that post, but I can't find what to add in there. Please read my las post.

I also wanted to attach another file, but I got an error, something like you are not allowed. It goes here now.

pepanee · Jun 24, 2025

Don't add anything.

1) Open Command Prompt as an Administrator
2) Paste this in there:
reg add "HKLM\SYSTEM\CurrentControlSet\Control\Power\PowerSettings\238C9FA8-0AAD-41ED-83F4-97BE242C8F20\9d7815a6-7ee4-497e-8888-515a05f02364" /v "Attributes" /t REG_DWORD /d 2 /f
3) Press Enter

hdmi · Jun 25, 2025

The powercfg command that I posted above works, and doesn't require administrator privileges to run. If you still can't see the Hibernate after setting in the Sleep category, it's because hibernate is off or not supported (or else you have gremlins).
Run powercfg a to see if hibernate is on. (powercfg h on turns it on, and powercfg h off turns it off.)

Neophile · Jul 8, 2025

pepanee said:
Don't add anything.

1) Open Command Prompt as an Administrator
2) Paste this in there:
reg add "HKLM\SYSTEM\CurrentControlSet\Control\Power\PowerSettings\238C9FA8-0AAD-41ED-83F4-97BE242C8F20\9d7815a6-7ee4-497e-8888-515a05f02364" /v "Attributes" /t REG_DWORD /d 2 /f
3) Press Enter

There is some sort of error with your command, which I copied and pasted, because I got the following reply:

At line:1 char:136
+ ... 1ED-83F4-97BE242C8F20\9d7815a6-7ee4-497e-8888-515a05f02364" /v "Attri ...
+ ~
You must provide a value expression following the '/' operator.
At line:1 char:136
+ ... ED-83F4-97BE242C8F20\9d7815a6-7ee4-497e-8888-515a05f02364" /v "Attrib ...
+ ~
Unexpected token 'v' in expression or statement.
+ CategoryInfo : ParserError: (:) [], ParentContainsErrorRecordException
+ FullyQualifiedErrorId : ExpectedValueExpression

Neophile · Jul 8, 2025

hdmi said:
powercfg -attributes sub_sleep hibernateidle -attrib_hide

Sorry. It doesn't work for me. Thank you.

hdmi · Jul 9, 2025

Neophile said:
Sorry. It doesn't work for me. Thank you.

See post #9. In an elevated command prompt, turn hibernate on (powercfg h on).

P.S., if the Advanced power settings window panel is still open when you run the commands, then you also need to close/reopen that window panel. Then you will be able to see the "Hibernate after" setting in it.

Neophile · Jul 9, 2025

hdmi said:
See post #9. In an elevated command prompt, turn hibernate on (powercfg h on).

P.S., if the Advanced power settings window panel is still open when you run the commands, then you also need to close/reopen that window panel. Then you will be able to see the "Hibernate after" setting in it.

I am very sorry, but it does not work for me, not even after rebooting. Thank you for your effort to help.

XxXxX · Jul 10, 2025

do you have 'fast start up' enabled in the power options?
control panel > power options >
on the left of this window 'change what the power button do'
the fast start up option is at the bottom of this window.

if fast start up is enabled please disable fast start up and then try the hibernation settings.
a restart will be required before checking the hibernation settings.

best of luck, Steve ..

hdmi · Jul 10, 2025

Although disabling Fast Startup (like how @XxXxX described) very often does fix it, another thing that you can try is to disable Hybrid Sleep in the currently active power plan.

In an elevated command prompt,

To disable Hybrid Sleep for AC power in the current power plan:
powercfg setacvalueindex scheme_current sub_sleep hybridsleep 0
To disable Hybrid Sleep for DC power in the current power plan:
powercfg setdcvalueindex scheme_current sub_sleep hybridsleep 0
To enable Hybrid Sleep for AC power in the current power plan:
powercfg setacvalueindex scheme_current sub_sleep hybridsleep 1
To enable Hybrid Sleep for DC power in the current power plan:
powercfg setdcvalueindex scheme_current sub_sleep hybridsleep 1
To apply the changes:
powercfg s scheme_current

In a command prompt (elevated or not),

To view these two different settings:
(powercfg qh scheme_current sub_sleep hybridsleep|find " Current AC Power Setting Index: 0x00000001">nul 2>&1&&(echo Hybrid Sleep for AC power is enabled in the current power plan.)||(echo Hybrid Sleep for AC power is disabled in the current power plan.))&(powercfg qh scheme_current sub_sleep hybridsleep|find " Current DC Power Setting Index: 0x00000001">nul 2>&1&&(echo Hybrid Sleep for DC power is enabled in the current power plan.)||(echo Hybrid Sleep for DC power is disabled in the current power plan.))

abactuon · Jul 10, 2025

powercfg /a

Neophile · Jul 22, 2025

XxXxX said:
do you have 'fast start up' enabled in the power options?
control panel > power options >
on the left of this window 'change what the power button do'
the fast start up option is at the bottom of this window.

if fast start up is enabled please disable fast start up and then try the hibernation settings.
a restart will be required before checking the hibernation settings.

best of luck, Steve ..

I tried, but it didn't work after rebooting.
Thank you.

Neophile · Jul 22, 2025

XxXxX

hdmi

abactuon

PS C:\Users\. . . . . . . .> powercfg /a
The following sleep states are available on this system:
Standby (S0 Low Power Idle) Network Connected
Hibernate
Fast Startup

The following sleep states are not available on this system:
Standby (S1)
The system firmware does not support this standby state.
This standby state is disabled when S0 low power idle is supported.

Standby (S2)
The system firmware does not support this standby state.
This standby state is disabled when S0 low power idle is supported.

Standby (S3)
This standby state is disabled when S0 low power idle is supported.

Hybrid Sleep
Standby (S3) is not available.

Thank you. What else can I do, please?

Power Options

Well-known member

My Computer My Computer

At a glance

Like a rolling drone.

My Computers My Computers

At a glance

At a glance

Well-known member

My Computer My Computer

At a glance

Jack of all trades – master of none

My Computers My Computers

At a glance

At a glance

Well-known member

pepanee​

Attachments

My Computer My Computer

At a glance

Well-known member

My Computer My Computer

At a glance

Well-known member

My Computer My Computer

At a glance

Well-known member

My Computer My Computer

At a glance

Jack of all trades – master of none

My Computers My Computers

At a glance

At a glance

Well-known member

My Computer My Computer

At a glance

Well-known member

My Computer My Computer

At a glance

Jack of all trades – master of none

My Computers My Computers

At a glance

At a glance

Well-known member

My Computer My Computer

At a glance

Just a Computer User

My Computers My Computers

At a glance

At a glance

Jack of all trades – master of none

My Computers My Computers

At a glance

At a glance

Well-known member

My Computer My Computer

At a glance

Well-known member

My Computer My Computer

At a glance

Well-known member

XxXxX​

hdmi​

abactuon​

My Computer My Computer

At a glance

Similar threads

My Computer

My Computers

My Computer

My Computers

pepanee

My Computer

My Computer

My Computer

My Computer

My Computers

My Computer

My Computer

My Computers

My Computer

My Computers

My Computers

My Computer

My Computer

XxXxX

hdmi

abactuon

My Computer