So you recommend against doing it myself then right? My concern is if you do something wrong, there could be a boom or like someone else said like acid coming out where it isn't safe? Would it be dangerous to do this if you have no experience at this stuff? Other people seem to say it's easy and simple but you say it's a hassle but is it unsafe if you do it wrong?I have mostly cyberpower ups's. It always seems a hassle to replace batteries. Unplug all devices, I used to take the ups to the garage work bench, perhaps your wife will allow you to do it on the kitchen table :O and remove the battery access cover, slide the batteries out, disconnect and reverse. So what I did was, [my example below requiring 2 batteries at a time] was just extend the wiring from inside about 2 feet of heavy gauge wire, put on connectors and built a container and connected the 2 batteries in series. This way is much easier to change, measure the voltage on them, keep clients plugged in etc. I used the same 12 v battery but bought some with higher amp hour rating. Some ups's only require 1 battery. Only do this if you are comfortable with this kind of work. YMMV
My Computer
At a glance
Windows 11 Pro
- OS
- Windows 11 Pro




