Show us your PC/Setup

sound proofing

Scannerman said:

Not mine but I worked on enough of them that looked like this.

Click to expand...

I started sneezing just looking at that.

I just saw one a couple weeks ago, I think my grandson thought they were self-cleaning!

To be fair, my daughter built this when she was 11 years old. I installed the software and the operating systems.



Despite all the filters it is such a dust trap.
The pictures here don't really show it so well.

Computers by their vary nature are dust traps. All those fans move every bit of dust they can find through the computer.

gunrunnerjohn said:

Computers by their vary nature are dust traps. All those fans move every bit of dust they can find through the computer.

Click to expand...

Some, definitely more than others. The blue aquarium brings in slightly less dust than the pink one but I've found that these cases with the glass panels tend to bring in more dust than the hot boxes that have much less air flow. It would seem to be a trade off: If you want air flow, expect dust. If you don't want dust kill the air flow.



For the longest time I never understood why they would put dust filters on top of a case where air is normally exhausted. Apparently this is because some people build cases to intake air from the top of the case. The "hot boxes" I describe have no such thing. They usually have a little front intake and at best a little on the side and exhaust through the back of the case.

Scannerman said:

Some, definitely more than others. The blue aquarium brings in slightly less dust than the pink one but I've found that these cases with the glass panels tend to bring in more dust than the hot boxes that have much less air flow. It would seem to be a trade off: If you want air flow, expect dust. If you don't want dust kill the air flow.

Click to expand...

Major problem with that idea! The whole point of more fans is to keep things cool inside the case. Given the high power some systems run at, moving heat out of the case is a significant task. Heat is the killer of electronics. A general rule of thumb used widely in the electronics industry is every 10C temperature rise cuts the component life in half. So, if you have inadequate cooling and the temperature inside the computer is 20C higher than the well ventilated model, your computer's component life is roughly 1/4 the MTBF of the properly cooled case. Given all the emphasis made on cooling your processor and GPU, that's probably not a good way to go.

gunrunnerjohn said:

Major problem with that idea! The whole point of more fans is to keep things cool inside the case. Given the high power some systems run at, moving heat out of the case is a significant task. Heat is the killer of electronics. A general rule of thumb used widely in the electronics industry is every 10C temperature rise cuts the component life in half. So, if you have inadequate cooling and the temperature inside the computer is 20C higher than the well ventilated model, your computer's component life is roughly 1/4 the MTBF of the properly cooled case. Given all the emphasis made on cooling your processor and GPU, that's probably not a good way to go.

Click to expand...

Agreed. My point is not so much that one is better than the other as I would suggest each has its up side and down side. What I find interesting is that some newer computing units are moving away more from traditional air and liquid cooling by employing massive heat sinking. Many of these newer devices are very compact and I can't help but to raise an eyebrow and wonder what their life cycle might be. Dust is also a killer of electronics not only because it holds heat, but also because it is frequently electrically conductive. The battle rages on but a large part of it is determined by the usage. For example, someone basically using a PC for standard office tasks, checking e-mails, and mostly engaging in text won't really need massive cooling for their humble PC. Someone engaging in gaming, high end video processing or rendering, content creation, commercial servers, massive tasking etc. will certainly need better cooling.

New case and Motherboard Asrock Taichi. Case is Corsair 5000t.

no1yak said:

New case and Motherboard Asrock Taichi. Case is Corsair 5000t.

Click to expand...

Nice system. Nice and clean

Scannerman said:

What I find interesting is that some newer computing units are moving away more from traditional air and liquid cooling by employing massive heat sinking. Many of these newer devices are very compact and I can't help but to raise an eyebrow and wonder what their life cycle might be.

Click to expand...

Things like this >>

PCPartPicker Part List: https://uk.pcpartpicker.com/list/4MKJXR

CPU: Intel Core i5-14600K 3.5 GHz 14-Core Processor (£188.26 @ Amazon UK)
CPU Cooler: Alphacool Eisbaer Aurora 280 41.8 CFM Liquid CPU Cooler (£170.13 @ Amazon UK)
Motherboard: ASRock Z790 LiveMixer ATX LGA1700 Motherboard (£238.31 @ Amazon UK)
Memory: Patriot Viper Venom 32 GB (2 x 16 GB) DDR5-7000 CL32 Memory (£86.99 @ Amazon UK)
Storage: Silicon Power A55 1 TB 2.5" Solid State Drive (£67.36 @ Amazon UK)
Storage: Samsung 980 1 TB M.2-2280 PCIe 3.0 X4 NVME Solid State Drive (£79.99 @ AWD-IT)
Storage: Crucial P5 Plus 2 TB M.2-2280 PCIe 4.0 X4 NVME Solid State Drive (£201.85 @ Clove Technology - OOS)
Storage: Acer FA200 2 TB M.2-2280 PCIe 4.0 X4 NVME Solid State Drive
Storage: Toshiba P300 3 TB 3.5" 7200 RPM Internal Hard Drive (£144.81 @ Amazon UK)
Video Card: XFX Speedster MERC 310 Black Edition Radeon RX 7900 XTX 24 GB Video Card (£785.91 @ Ebuyer)
Case: Antec NX416L ATX Mid Tower Case (£52.00 @ Amazon UK)
Power Supply: MSI MPG A850GF 850 W 80+ Gold Certified Fully Modular ATX Power Supply (£201.81 @ Clove Technology - OOS)
Case Fan: Noctua F12 PWM 54.97 CFM 120 mm Fan (£21.95 @ Amazon UK)
Case Fan: Noctua F12 PWM 54.97 CFM 120 mm Fan (£21.95 @ Amazon UK)
Case Fan: Noctua NF-A14x25 G2 PWM Sx2-PP 91.6 CFM 140 mm Fans 2-Pack (£63.90 @ Amazon UK)
Monitor: MSI MAG 325CQRF-QD 31.5" 2560 x 1440 170 Hz Curved Monitor (£371.99 @ MoreCoCo - OOS)
Mouse: Razer Viper V3 Pro Wireless/Wired Optical Mouse (£143.90 @ Amazon UK)
Total: £2841.11
Prices include shipping, taxes, and discounts when available
Generated by PCPartPicker 2025-06-16 19:54 BST+0100












Today.




Pretty bitchen fast.



In Forza with maxed RT and a 7900XT with 5800X3D the CPU would bottleneck the 7900 XT, the 14600K flat out destroys it and will hold 80 FPS+ which the Radeon 7000 series are not strong at RT to begin with, and I usually turn it off, but since it performs fine, left it on.

Moving from fast DDR4 B-die 3600 C14 to DDR5 7000 (At 6800 C31 due to IMC / board limits) C32 improved processor performance by around 15% or higher depending on the title and improves memory bandwidth substantially.

The XTX's higher GPU horsepower really leaves the XT in the dirt if you are trying to run the latest games at 1440P native no upscaling.

biohaze said:

Video Card: XFX Speedster MERC 310 Black Edition Radeon RX 7900 XTX 24 GB Video Card (£785.91 @ Ebuyer)


View attachment 137041

Click to expand...

If you bought the XFX 7900XT as I did, you should have gotten a brace for the GPU, so I'm wondering why not use that as opposed to whatever that is holding up your GPU? Here's mine with said brace. (This before I swapped to a RX 9070 XT)....

Mine did come with that brace, but it was not holding the GPU vertical, it was sagging slightly.

Some images of the build, fans have all since been replaced with higher end Noctua.




Serious memory tuning^ fast as heck.

biohaze said:

Mine did come with that brace, but it was not holding the GPU vertical, it was sagging slightly.

View attachment 137053

Click to expand...

That's odd. Never had sagging with mine. Rock solid there. Wish I could have used it with my RX 9070XT. Instead you get an adjustable support guide to hold up GPU. Note the right side of GP. I have it turned so as not to show the silver thumb screw with the XFX logo....

Anyway, nice setup you have there.

pseymour said:

I started sneezing just looking at that.

Click to expand...

Same. I'm gonna have to take a whole box of Claritin! lol

I wish someone could come over and help me with cable management. . .

JAM83 said:

I wish someone could come over and help me with cable management. . .

View attachment 137091

Click to expand...

Rule #1 - Run all cables and wires to the back side panel and back out through the cut-outs for connection wherever you are able. This means you will have to remove both side panels.