Map network drive is fubar

It started with my server... drops conn to networked drive from my nas. Reconnect fails with following message:



So I started troubleshooting on the server and checked everything, So I figure it is just a glitch, do a quick net use and ping to check network connectivity (I am doing some reconfiguration of that, reducing hardware and connecting more devices directly via LAN and removing a couple of superfluous switches in the process.) and everything seems fine up until I get to the part where I try to reconnect the share I have on my NAS. It just wont work to map it. I am unable to map anything via "Map Network drive" or via net use.

And then I tried mapping from my W11:



Hokay, this is not good. Error code 0x80070043

Via someone else I was directed here: https://docs.microsoft.com/en-us/tr...g/guest-access-in-smb2-is-disabled-by-default and I also searched a bit more and stumbled over additional suggestions enabling SMBv1, which was, obviously, disabled until now. Tried it, no go, and then uninstalled it again.

The error on the server may not be something you guys can help with, but when it also happens on W11 desktops, well I come here to ask.

The NAS has no issues that i can think of. Nothing in the logs and http connectivity is there.

Coram Daes said:

It started with my server... drops conn to networked drive from my nas. Reconnect fails with following message:

So I started troubleshooting on the server and checked everything, So I figure it is just a glitch, do a quick net use and ping to check network connectivity (I am doing some reconfiguration of that, reducing hardware and connecting more devices directly via LAN and removing a couple of superfluous switches in the process.) and everything seems fine up until I get to the part where I try to reconnect the share I have on my NAS. It just wont work to map it. I am unable to map anything via "Map Network drive" or via net use.

And then I tried mapping from my W11:

Hokay, this is not good. Error code 0x80070043

Via someone else I was directed here: https://docs.microsoft.com/en-us/tr...g/guest-access-in-smb2-is-disabled-by-default and I also searched a bit more and stumbled over additional suggestions enabling SMBv1, which was, obviously, disabled until now. Tried it, no go, and then uninstalled it again.

The error on the server may not be something you guys can help with, but when it also happens on W11 desktops, well I come here to ask.

The NAS has no issues that i can think of. Nothing in the logs and http connectivity is there.

Click to expand...

Hi there
What's the NAS --if it's a linux based one then try to see if SAMBA is running on it.

On Windows try ping the ip address of the server.

Also on windows install filezilla and then try and see if it will connect to nas (in the filezilla addr of server should be sftp://ip server address, username, password.

If all else fails reboot rooter / cable box or whatever, and all PC's including server.

Cheers
jimbo

hi Jimbo, the NAS is ASUSTOR, not really sure what their os is, but Unix based.

Ping works all ways, back and forth.

I enabled sftp and was able to connect with filezilla, don't use it normally

Already reconnected and rebooted everything, I have been troubleshooting this on and off for 3 days